Mc INTOSH hfe mcintosh mc206 service free download

File name hfe_mcintosh_mc206_service.pdf

POWER AMPLIFIER CONTENTS Performance Specifications ... 2 Heatsink Schematic and PCB ... 10 - 12 Notes ... 2 Driver Schematic and PCB ... 13 - 15 Rear Panel ... 3 Capacitor Schematic and PCB ... 15 - 16 Section Location ... 3 Meter Schematic and PCB ... 17 - 21 Block Diagram ... 4 Parts List ... 22 - 24 Interconnection Diagram ... 5 - 8 Exploded Views and Parts Lists ... 25 - 28 Multi-channel Schematic and PCB ... 9 Repacking Instruction ... 29 SERVICE MANUAL PERFORMANCE SPECIFICATIONS Power Output Input Impedance Minimum sine wave continuous average power output per 10,000 ohms channel, all channels operating is: 200 watts into 4 ohm load Wide Band Damping Factor 120 watts into 8 ohm load 100 at 4 ohms 200 at 8 ohms Rated Power Band 20Hz to 20,000Hz Power Requirements 100 Volts, 50/60Hz at 13.2 amps Total Harmonic Distortion 110 Volts, 50/60Hz at 12.0 amps Maximum Total Harmonic Distortion at any power 120 Volts, 50/60Hz at 11.0 amps level from 250 milliwatts to rated power output is: 220 Volts, 50/60Hz at 6.0 amps 0.005% for 4 or 8 ohm loads 230 Volts, 50/60Hz at 6.0 amps 240 Volts, 50/60Hz at 6.0 amps Dynamic Headroom Note: Refer to the rear panel of the MC206 for the 1.6dB correct voltage. Frequency Response Dimensions +0, -0.25dB from 20Hz to 20,000Hz Front Panel: 17-1/2 inches (44.45cm) wide, 7-1/8 inches +0, -3dB from 10Hz to 100,000Hz (18.10cm) high. Depth behind front mounting panel is 18