Tektronix TDSHT3 Quick Ref Card SourceTest free download

File name TDSHT3_Quick_Ref_Card_SourceTest.pdf

Getting Started with TDSHT3 4. To connect the DUT, click Tests > Connect. 8. If you have run the tests successfully, the software makes Result available automatically and displays the You can use this side of the quick reference card to get eye diagram plot and the clock jitter plot. You can also started with the Source Clock-Data Tests Select All test view both the result summary of the test and the report procedure. The other side contains a complete menu tree for configuration in the result pane. the TDSHT3 HDMI Compliance Test Software. NOTE. For additional procedures, refer to the TDSHT3 Quick Start User Manual. For complete operating instructions, refer to the online help. 5. Make the connections as follows: TDSHT3 HDMI Compliance Test Software enables unprecendented efficiency by providing a comprehensive range of tests, including Jitter Tolerance. 9. In the result summary pane, click Result Details to Source Clock-Data Tests Select All display the results of the tests. This option enables you to run the Eye Diagram, Duty Cycle, Rise Time, Fall Time, Clock Jitter, Over/Undershoot V-H, Over/Undershoot V-I, and Inter-Pair Skew test simultaneously. You will need one supported oscilloscope, two differential probes, one DC power supply 3.3 V, one EDID emulator, and one TPA-P-DI fixture. Follow these steps: 1. On the menu bar, click Tests > Select > Source. 10. In the Result Details dialog box, click Result Statistics 2. In the clock-data tests pane, click Select All. to display statistics based on the tests. 6. Ensure that your signal in the oscilloscope display is similar to the sample signal. Click View Waveform to display a sample of the expected signal. If the displays are not similar, go back and check your configuration and connections. 3. To change the configuration settings, click Tes