MAKITA 63475-WW-1 free download

File name 63475-WW-1.pdf

TECHNICAL INFORMATION Subject Change of Torque Limiter Complete 63475 For Models HR3000C, HR3550C, HR4040C, HR4500C Country All countries Description Adhesive has been applied to Pin 4 in Torque Limiter Complete to prevent the Pin 4 from coming out of place. Torque Limiter without Pin 4 may cause a Round Nut to rotate, resulting in the torque out of presetting. To avoid such trouble, this addition of adhesive has been made. (However, Pin 4 in the Torque Limiter Complete which is installed on Rotary Hammers does not come out of place. Accordingly, this change is applicable to Torque Limiter as a replacement part only.) Adhesive applied to the Pin 4 Torque Limiter Complete (Item No.104 of Parts List) Note: Regarding Torque Limiter Complete as a replacement part Round Nut please check the Torque Limiter for Pin 4's presence. When Pin 4 is not present, insert Pin 4 in the portion where the notch on the Driving Nut of the Torque Limiter meets Pin 4 that of a Round Nut of the Torque Limiter as shown on right. Caution: Be careful not to drop Pin 4 at the time of repairing. Please use LOC TITE 603 (Part No. 045047-7A) as a adhesive. Driving Flange Interchangeability(I/C) Item No. Current part Q'ty I/C New part Q'ty Note HR3000C, Torque Limiter Complete Torque Limiter Complete 1 Yes 1 HR3550C: 151692-9 152955-6 104 HR4040C: Torque Limiter Complete Torque Limiter Complete 1 Yes 1 084 150860-1 159947-6 HR4500C: Torque Limiter Complete Torque Limiter Complete 1 Yes 152954-8 1 070 152763-5 Implementation Ready to your next order