NOKIA 6rh42assem free download

File name 6rh42assem.pdf

CCS Technical Documentation RH-42 Series Transceivers Assembly Issue 2 09/2003 Confidential Nokia Corporation RH-42 Assembly CCS Technical Documentation Page 2 Nokia Corporation Confidential Issue 2 09/2003 RH-42 CCS Technical Documentation Assembly Assembling the RH-42 Basic Transceiver Assemble the D-cover assembly. 1. Step 1. Assemble the metal deck from the back cover side by pressing it with your fingers. All six tabs should snap into the slots in the D-cover. 2. Step 2. Place the IR window onto the D-cover before assembling the antenna. Step 4. Press the antenna into its place. Note: Make sure that the antenna springs do not get damaged or touched during assembly. No fingerprints should get on the springs. 3. 4. Step 5. Place one end of the battery latch into the D-cover slot. Step 6. Bend the latch and move the other end into the D-cover slot. The battery connector will be assembled onto the D-cover 5. with interference fixing. Step 7. Place connector onto D-cover with tweezers. Step 8. Push the connector into the D-cover slot with your fingers. Note: Make sure that the battery connector is below the D-cover edges after assembly. If the buzzer or vibra assembly is in place, make sure that the buzzer springs stay intact. They may be damaged, if touched. Issue 2 09/2003 Nokia Corporation Confidential Page 3 RH-42 Assembly CCS Technical Documentation Step 9. Place the vibra assembly into its slot. Use 6. tw