Konica Minolta 7020FV1E free download

File name 7020FV1E.PDF

1 ADJUSTMENT 4 DIAGRAMS 3 SERVICE 2 ISW 1 ADJUSTMENT 1 ADJUSTMENT ADJUSTMENT HOW TO USE THE ADJUSTMENTS WHEN ADJUSTMENT SECTION REPLACING PARTS [1] Construction Adjustments (including checks) and settings are not only required when a defective copy image occurs, but also This section details adjusting items and procedures. Use after replacing or reinstalling certain parts. this section for making adjustments and as a checklist before implementing corrective measures in the field. [How to use the tables] The following items are used in the tables throughout this 1. Does the power supply meet the requirements? section. 2 ISW 2. Is the power supply properly grounded? 3. Is the machine sharing its power source with another 1. Mode high current consumption machine that draws large Indicates the adjustment mode. currents intermittently? (e.g. an elevator, air condi- ["25"] : 25 mode tioner, or other source of electrical consumption) 4. Is the installation environment suitable? ["36"] : 36 mode a. The machine must be installed in a well- ["47"] : 47 mode ventilated place free from high temperature, high 2. Codes humidity and direct sunlight. 3 SERVICE b. The machine must be installed on a level floor. Indicates the applicable code and/or Copy Quantity Setting button for each mode. 5. Does the cause of a defective image lie in the original itself? 3. Conditions 6. Is the density adjusting control at the proper position? New: Indicates adjustment (including check) is 7. Are the original glass and RADF platen guide clean?