Sanyo STK4050II free download

File name stk4050ii.pdf

Ordering number: EN 4807A Thick Film Hybrid IC STK4050II AF Power Amplifier (Split Power Supply) (200W min, THD = 0.4%) Features · Compact package for thin-type audio sets · Member of pin-compatible series with outputs of 20 to 200W · Easy heatsink design to disperse heat generated in thintype stereo sets · Constant-current circuit to reduce supply switch-on and switch-off shock noise · External supply switch-on and switch-off shock noise muting, load short-circuit protection, thermal shutdown and other circuits can be tailored-designed. Package Dimensions unit: mm 4051A [STK4050II] Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Symbol VCC max j-c Tj Tc Tstg Conditions Ratings ±95 0.95 150 125 -30 to +125 Unit V °C/W °C °C °C Recommended Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings ±66 8 Unit V SANYO Electric Co., Ltd. Semiconductor Business Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 61197HA (ID) / 33095TH (ID) No. 4807--1/3 STK4050II Operating Characteristics at Ta = 25°C, VCC = ±66V, RL = 8 (noninductive load), Rg = 600, VG = 40dB Parameter Quiescent current Output power Total harmonic distortion Frequency response Input impedance Output noise voltage Neutral voltage Symbol ICCO PO THD fL, fH ri VNO VN Conditions VCC = ±80V THD = 0.4%, f = 20Hz to 20kHz PO = 1.0W, f = 1kHz PO = 1.0W, +0 -3 dB min 15 200 ­ ­ ­ ­ -70 typ ­ ­ ­ 20 to 50k 55 ­ 0 max 120 ­ 0.3 ­ ­ 1.2 +70 Unit mA W % Hz k mVrms mV PO = 1.0W, f = 1kHz VCC = ±80V, Rg = 10k VCC = ±80V Notes. All tests are measured using a constant-voltage supply unless otherwise specified. Output noise voltage is measured using the transformer supply specified below. The output noise voltage is the peak value of an average-reading meter with an rms value scale. The noise voltage waveform does not inlcude any pulse noise. Specified Transformer Supply (MG-250 or Equivalent) Equivalent Circuit No. 4807--2/3 STK4050II Sample Application Circuit (200W min AF Power Amplifier) s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or