File name Epson Head_Cleaning.pdf

Confidential Procedure of Cleaning and recovery of Piezoelectric Head EPSON Objective. This procedure seeks the orientation to make the cleaning and recovery of heads of the ink jet printers EPSON. And the larger incidence of impression flaws feels for improper use of cartridges non genuine EPSON or cartridges remanufactured in the market in general. Follow some recommendations to remove a better revenue of your EPSON printer. The use of cartridges non genuine Epson, can generate problems in the printing system. Only the ink EPSON guarantees a perfect operation and excellent print quality. The print flaws can be caused by several situations.: environmental conditions of discharge temperature and relative humidity of the air. The composition of the ink back chemical elements that guarantee a time of fast drying in the paper, providing time of faster printing and without blots. For this the ink will have to evaporate quickly. This same component of fast drying goes to be acting in a different way in agreement with the temperature adapts and relative humidity of the air. Atmospheres with conditioned air can to cause a false sensation of ideal temperature, but the relative humidity of the air is not usually controlled by certain air conditioning units. Another condition for which the equipment is criticized, it is the lack of use for a very long period, could happen the drying of the surface of the ink injectors. Surface this that is composed by hundreds of small holes, finer than a thread of hair, through where the ink should come out and to compose the image printed. Former.: (Black Head Stylus 600 = 64 injectors) The head of impression of the models EPSON Stylus is in a rest position when the equipment is in rest or turned off. It is position it is on CAP (Receiver Capture of Ink) that does part of the Suction Pump (Pump). ink Capture has the function to absorb the ink during the process of cleaning accomplished through panel, in the process of changing of cartridges or automatically when calling and with times controlled by the internal clock of the printer. When the head is in rest the Capture it is wet of ink absorbed in cycles of previous cleanings. It is not dried, it should evaporate or it can cause the blockage of CAP and this way the printer won't get to make cleanings, because the cleaning of the head is completely a mechanical process. The impression head is not worked electrically during the cycle of cleaning. Where it is usually noticed only the flaw of one impression head after the change of the cartridge. Because the Pump or CAP was probably already obstructed and when they were requested if it noticed the flaw. Avoid flaws, See what can harm your printer a - Use of the printer in atmospheres with high temperature above 35°C b - Exhaustion of the ink cartridge or removal of the cartridge from the printer for very long periods. c - Use of cartridges with damaged superior sealing wax, removed or perforated (it labels white). Causing a