free download

File name 1401ps.pdf

TOSHIBA STORAGE DEVICE DIVISION SD-M1401 DVD-ROM DRIVE PRODUCT SPECIFICATION May 2000 REV. 1.0 Specifications are subject to change without notice DOCUMENT NUMBER 12369 Notice 1.This product has no over-current protection circuit. System should have appropriate over-current protection. Toshiba Corporation makes no warranty of damages caused by no over-current protection. 2.This has a little possibility of errors. To prevent damages and injury caused by the above, careful consideration for the safety and integrity should be taken in the system design. Do not use this product in a system that may cause hazard to human being or material loss caused by the failure, loss of data and/or errors of this product. 3.Do not disassemble or modify this product. Or, reliability, safety and performance can not be guaranteed. 4.Turn off the system power before mounting/removing this product. Or, it may cause failure or damage. 5.Because the DC power socket of this product allows insertion of only one side direction, ascertain direction carefully to insert the plug. 6.To build this product in an equipment, handle it only in electrostatically safe environment. Do not touch connecting terminals directly. Or, the product may be damaged by electrostatic energy. 7. This product can playback discs based on the formats described in item 3.1.(1). Do not load a disc which is not conformed with those formats such as a shaped disc or a disc with its weight unbalanced excessively. A very high speed rotation is carried out inside the product, so abnormal vibration and malfunction may occur if disc described above is loaded. 8. When a disc cannot be ejected because of some troubles, etc., turn off the power for the unit and eject the disc using the emergency eject mechanism after passing more than 1 minute. When the emergency eject is carried out while the power is on or immediately after the power off, the disc may be eject in a rotating status. We do not assure if the disc is damaged by this. 9. When you close the tray, power must not be turned off. If the tray is pushed in with the hand during power off, a breakdown may occur because the mechanism in the product is not in the transit state during power off. 10. This product comes under the regulations of TWA (The Wassenaar Arrangement on Export Controls for Conventional Arms and Dual Use Goods and Technologies). When exporting the product, an export permission according to the regulations of your country will be required. SD-M1401 Rev.1.0 11. As for mounting bracket to incorporate this product into an equipment, (1) When this product is incorporated into an equipment by using the mounting screw holes in the right and left side planes, the clearance between this product and the mounting bracket is too wide; (2) When this product is incorporated into an equipment by using the mounting screw hole in the bottom, the surface of the mounting bracket is contorted. If you use such mounting bracket as the above, this product