File name Denon-DCD1500AE cd.pdfFor Europe model
Ver. 1
SERVICE MANUAL
MODEL DCD-1500AE
SUPER AUDIO CD PLAYER
For purposes of improvement, specifications and
design are subject to change without notice.
Please use this service manual with referring to the
operating instructions without fail.
Some illustrations using in this service manual are
slightly different from the actual set.
TOKYO, JAPAN
Denon Brand Company, D&M Holdings Inc.
X0243 V.01 DE/CDM 0508
DCD-1500AE
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
LASER RADIATION
Do not stare into beam or view directly with optical instruments, class 3A laser product.
2
DCD-1500AE
DISASSEMBLY
(Follow the procedure below in reverse order when
reassembling.)
1. Top Cover
(1) Remove 8 top and side screws. And remove 2 rear
screws, then detach the Top cover.
2. Front Panel Ass'y
(1) Detach the Loader panel Ass'y by lifting.
(2) Remove 4 top screws and 2 bottom screws of Front
Panel Ass'y.
(3) Remove H/P BRACKET and CHASSIS screw, then
detach the Front Panel Ass'y.
(Refer to Fig. 1)
Fig. 1
3
DCD-1500AE
3. Mechanism
(1) Remove 4 screws, then detach the Mechanism.
4. Attachment of Mechanism
(1) Mechanism is put on MECHA BRACKET BOTTOM.
(2) ADJUST.COLLAR is put on 2 places of the front.
(3) 2 front side screws are tightened.
(4) 2 rear side screws are tightened.
ADJUST. COLLAR
MECHA BRACKET BOTTOM
5. Attachment of Mechanism
Follow the procedure below.
(1) 1 screw of volume side is tightened.
(2) 1 screw of H/P jack side is tightened.
(3) (4) 2 screws of H/P jack top is tightened.
1 3 4 2
(Note) When assembling the volume pwb and the bracket,
insert thickness 1.6mm boar |