Philips FC8412 free download

File name FC8412.pdf

City Line Chicago Vacuum cleaner FC8412 Philips Domestic Appliances and Personal Care Service Manual PRODUCT INFORMATION - To disassemble the cordwider use Torx screw driver no T10, which is one of set consisting of : - Electronic controled motor rpm T20, T15, T10, T9, T8, T7 and T6 = 4822 395 50145. - Cordwinder build-in with flat cord - First remove the 2 screws B of - Dustbag-full indicator in dustcover (item 15) hinge turn. Remove - The Infrared remote control can adjust the suction (item 10) window of the power with 5 speeds. When switched on, the appliance PCB-holder by placing a small always starts with the highest power, even without a screwdriver in the recesses on both sides of the window and connected hose. Use LR03 batteries, Alkaline is advised. opening the snap connection. - This product meets the requirements regarding interference suppression on radio and TV. - Remove the PCB-holder of - After the product has been repaired, it should function (item 10) from the upper housing properly and has to meet the safety requirements as by placing a flat screwdriver officially laid down at this moment. between the front of the PCB- holder and the upper housing as shown in the drawing. The TECHNICAL INFORMATION PCB-holder has snaps which fit - Maximum air displacement : 34 l/sec into the upper housing. - Maximum vacuum water column : 280 cm - Power consumptio (IEC) 225V : 1400 W REPAIR INSTRUCTION - Dust storage capacity : 2 litres - Give attention that the contact fingers (item 45) are placed on - Cord length (depends on version) : 6m the cord-winder shaft in such a way that the pressure point of the - Filter system : 6 filters cordwinder knob to the cord winderleve