| Subject | Text |
| VS and VA voltages label on panel says va 63 & vs 207
with all boards connected
power |
| Sound no picture and Red dot/speckles/sparkles fix summary | This post is basically for anyone that stumbles across it trying to fix what seems like two fairly c |
|
|
| Plasma fault | The standard fix is to replace panels-eg Zsus,Ysus etc- no one fixes to component level- the manufa |
| samsung plasma no picture ? | just a quick question please.
i have a samsung 50q7hd plasma.
set has no picture panel seems d |
| Samsung Plasma -no picture/sound -just clicks | Samsung 42SD 5SD -42" Plasma
No picture or sound. Turn it on, clicks and the neon flashes 5 |
| LG42" plasma | LG42PQ3000. Standby red to blue. Screen channel identification- full screen for a few milliseconds t |
| Fried IC | What does a fried IC look like? There are no visible problems (that I can see).
If I unplug both |
| Thanks again.
When I unplugged the YSUS, the blue indicator light on the front stays on for abou |
| So I found a cheap YSUS board on ebay. I installed it and now the set powers up and I can activate |
| power on error PDP 42V5 board. | The problem of this screen is no picture and sound at all, power led on the front go on and stay gre |
| Re: Any help? | [quote:b2a7d78c0b="SDS"]Sorry but i don't have shematics either.
I have the same model with the s |
| advice, lg plasma 2 white vertial lines? pictures included. | got a MZ42PZ44 lg 42" plasma,
it origanally had 2 black vertical lines on picture.
pictu |
| So I finally got this plasma fixed. With the help of the power supply force on guide and the DW1 tro |
| Re: LG Plasma RZ-60PY10 NO PICTURE | Problem with no picture is normally related to the Ysus and Zsus PCB's. There are fuses located on e |
| Dead Screen on LG Plasma TV | Hi,
I guess my earlier post fell thru the cracks, but if anyone has any idea how I might fix this |
| I have been looking over this unit more today, and eveywhere I look LG stickers and part numbers kee |
| Toshiba 42HP66 repair manual | Minnie,
Thank you for your response. The Y-sus board could be bad, I do not know, how do I test |
|
|
| Whoa. Excellent information, much of it over my head but I think I get most of it.
I'd like to t |
| Thanks Minnie,
I powered up the unit.
At the Y_sus Board I get:
VA=90 volts DC+/-
VS=60 |
| Hi minnie and thanks for the reply.
Is there any way to determine if it's the Y sustain or the Y |
| [quote:e513c44427="Tushy"]Hi minnie,
With everything hooked up again, the Va and Vs reads 0v.
|
| Parts Wanted | Wanted Y-Sus. board for LG PDP42V7 Plasma Urgently. |
| were can i fine that part minnie u said the ysus board ok i found that but were can i locate the 180 |
| toshiba 42hp66 | [quote="Anonymous"]Yes, sorry not logged in![/quote]only 18 months old, quit all of a sudd |
| PS-50Q96HD samsung picture fault ( picture attached ) | i got a PS-50Q96HD samsung set suffers from a green / yellow / red dotted picture ?
orignal fault |
| Forget for now the logic board.
-------
I looked again to the "photographic service" |
| well i put a new ysus board and a new zsus board in and still the same thing, when i turn it on i ge |
| LG PDP42V7 Plasma TV - sound, but no picture. | Hi all.
:)
This is an LG Plasma screen TV.
Full model number PDP42VB74013.
With a couple of |
| well i ordered the zsus board, it was $150 shipped brand new. I also found the ysus board @ $180 shi |
| about you .t.v | it sounds like the back light or, the inverter boards could be your problem,.also, the ysus board wi |