| Subject | Text |
| Faulty gate motor | It's a sliding gate, motor looks like a car wiper motor, I checked connections etc, seems to be fine |
| Can I just replace the cog on motor ? | Hi,
Thanks for the reply...
Can I just replace the cog on motor ?
Or do I have to replace the |
|
|
| [quote:e59dd6ff66="javelinpr"]i have the full schematics with the whole block diagrams, printed circ |
| Where can I buy a 2.2 uf 50V polarized Cap | Depends where you live. Maplin Electonics, R.S Components, Tandy. Radio shack etc. or search capacit |
| found a swollen cap. | Ok Got the next swollen cap, C520, a 10000mf 16v cap on the main board.
That cap gets AC from the |
| Lasejet 3100 Error "Printer Motor Error" | I took my laserjet 3100 apart for cleaning due to multiple sheet feeding. I ran the machine before I |
| Faulty Gate motor | My automated gate only opens halfway and stops, I noticed the low Battery led lights up. I replaced |
| Need Cap Values: Mitsubishi CS-35301 36" TV | I have a Mitsubishi 36" TV with the infamous bad capacitor problem, and two capacitors on the main p |
| Where can I buy a 2.2 uf 50V polarized Cap | Hi I need to find a place to buy thease. Thanks! My email is [email protected] |
| Update - requerst for help :-)
K, after poking around and checking all the fuses, ps etc, I attac |
| Orion Tv1333 no power up, squeals | Ok , i guess i could use some help in knowing i am looking at the right transistor ( I am a Pc repai |
| So a cap meter will give you a value but doesn't mean the caps good. 1uf = 1mf but if dry, could be |
| 50MP1 | Hello Stiff,
Yes these are 100% fixable, each fault plasma will require 2 SMD capacitors removing |
| Hi to you all newbee on forum would like some help please | Depends on the use but I would use a pulse width type like the one in the link below as the D.C moto |
| Is now OK. Found that I had left one of the trillions of connectors unplugged under the CD changer u |
| Hi!
I have the same machine and a wary similar problem!
After a lot of struggling I been able to |
| Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
|
|
| REPLACE TRIMMER CT301? WITH 15PF 50V CAP FOR LASTING CURE |
| Lines on top | I have vertical lines on the top of my screen and the picture is about a inch below the top,I beleiv |
| samsung sv-dvd1ea don't open | this is combo dvd/vhs video.don't open the dvd's door.double sensor is o.k.when push the button open |
| Tektronix 2465 service manual | I need this manual because I found, that in my recently bought used scope an IC on fan motor plate i |
| Hello, will somebody help me fix a Sony TC-250A Reel deck?! | Been many years since I saw a reel to reel. Is the hum motor hum or mains?
First thing would be to |
| re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
| Also, more obviously, if you have at least one bad PSU cap, then others could be on the way out. If |
| Sony KVC29-13D Scrolling Lines | Try again!!!
The above TV which has chassis AE1B is scrolling thin horizontal lines.
Just wonderi |
| HP LJ4L Gear | No, Gear is part of main motor assembly and is not available separately.
Try The Printer Works fo |
| [quote:0b7e708234="vtech"]Not familiar with the specific unit but sounds like you may have a spindle |
| Onky DV-CP500 Changer Carosel won't turn | I have a problem with my Onky DVD changer. The carosel SOMETIMES will not turn unless I manually tu |
| TV Shutdown | I think that you have an electrolytic capicitor that is drying out. Look at the main filter cap. or |
| Hitachi 50fx30b | Just wanted to let you know that we got the set working. Contacted Hitachi repairman and was told i |