Subject | Text |
Service Manual for Matsui or Sanyo TV 28M1MKII Please help | My Matsui Chasis 28M1MKII TV got a burnt resistor, the resistors were burnt beyond recognition they |
| One very common fault with these 30Ws is the voltage reference diode TL431, they look a bit like a T |
|
GRUNDIG AMIRA 32LW82-7505BS does not start | Hello, GRUNDIG AMIRA 32LW82-7505BS does not start, I opened the beast I saw waving: FSP204-2F01 (S07 |
| [quote:8640c8ac9d="jts1957"]I'd like to know how photo coupler in feedback loop, (if defective), wou |
samsung 40f6400 tv card bn44-00662A scheme -request | sir,
my TV samsung UA40F6400 failed and observed an indication POWER LED blinking and relay RL801 w |
Durabrand PSTB-1 Freeview Box | Hi everyone! I have a Duranbrand PSTB-1 freeview box that has just died on me. I opened the box up a |
GSM 4 W power amplifiers CGY2010G,CGY2011G | The [url=http://www.chinaicmart.com/suppliers/226/CGY2010G.html]CGY2010G[/url] and [url=http://www.c |
Panasonic VCR Message F04 | Hi!
The link is below.
http://www.eserviceinfo.com/downloadsm/9064/Panasonic_K-Mech.html
I checke |
| Check for Q803, is it ok? also check for C820, R828, D820 (MA4360L / 36V zenner), D819 (MA4100M / 10 |
| the loading motor on the bottom of the deck has a small plastic coupler on it, this part often split |
power supply fault | Have you checked the bridge rectifier plus the opto coupler if this has died then you will not see a |
Panasonic VCR Message F04 | First of all with the cover removed the start/end sensors may be picking up artificial light upsetti |
| I'd like to know how photo coupler in feedback loop, (if defective), would be having a bad effect on |
| When the motor has been removed you will see that it has a worm gear on it and if you remove the wor |
| Could be loading motor plastic coupler located on the motor shaft under the worm slippng if split. I |
Analogue radio repairs | Radios for hard to fix radios
GP300:
Fault…. Doesn't turn On (Dead radio)
1/Check Fuses
2/Resold |