| Subject | Text |
| Fix for Panasonic NV-HS950B and other VCRs using K-Mechanism | Reverse picture search can develop a noise bar at the top of screen, perhaps ok at the very end of a |
| [quote="Pentode"]Usually bad soldered joints, we 'call dry joints' that are dull Grey look |
|
|
| remote control URC24 | Hello,
These universal remote works fine on most devices !
First, you have to program the remote |
| sound repeater | Hello masters of electronics.
I need to make a circuit that will repeat whatever is said into it af |
| Of course polarity is not an issue when dealing with AC .
As regard to the Targus, while it is not |
| Ground breaker for CATV | Know this is a response to an old post but...Be sure you do not bypass a ground with a filter you wo |
| I've never had the chance to see a set while it is in the "almost ready to fail" mode. It |
| [quote:83304d6359="jmja107"]I have basic skills, can't say i'm experianced in this, [b:83304d6359]I |
| Thanks... | ...for fixing the links! First time I'd tried including photos (not sure what went wrong :oops:).
|
| The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts
For example 1 am |
| I think it is a better deal to find an used dual-standard VHS machine, for example at Ebay. |
| How is the set stuck in standby? Are there any sounds coming from the back of the TV when you switch |
| Philips 29PT9418/79G MG3.1A chassis problem | I wonder if anyone out there can help me with this one, I have recently got an Philips 29PT9418/79G |
| Not sure if this will help: | If you have some electronic repair experience, start with some of the obvious possibilities:
1. C |
| important tips for tv suffering weak picture tube | for tv sony or japanese brand tv even us or european suffering weak emission of picture tube can inc |
| Unless you have some experience with mixing boards, that is not something to tackle. You'd at least |
| THOMSON ICC5 CMOS IMC with PIP | Hello,
this TELEFUNKEN ref SLX295 PIP has a problem with the PIP, and I would like to know how to |
|
|
| There is no set standards on numbering on SMD transistors. While there are several databases availab |
| Onida Marval 20 200w My tv dos not get currect colors | Hello Sir,
Onida Marval 20 200w
My tv dos not get currect colors
It shows rong colors to the or |
| Hi, to answer your qn in short,
- Video monitor works on a composite video mode (ie. multiple si |
| No problem with the RCA on S-Video with Dish Network. Maybe I should try composite. Maybe no TV is |
| Tuning Grundig TV model Arganto 70 | I have just acquired a Grundig TV second hand (Arganto 70). It works fine apart from the tuning of B |
| Fixed...............or never broken.
Some genuis from Apex decided to make a remote control for t |
| I think you should use a PLL solution. Build a VCO (voltage controlled oscillator) which can deliver |
| [quote:86f2b779df="joester"]I have the same converter, and it's dead too.
Mine was always hooked |
| re; vertical | Hi, you have bad electrolytic caps in the vertical circuit, usually
replacing ALL the defective one |
| Well guys poor faith doesn't take anyone,anywhere....i fixed the damn
laptop and i'm very happy wit |
| [quote:2be1234afc="airhead_1"]Good morning - The problems on all of the P30/P35's that I have fixed |
| Problem with Samsung P-401 DVD player | This DVD player distorts the color on my TV. It plays but the colors are everywhere AT TIMES. I have |
| Sony KP-53V25 Problems | On your TV, is it the board on the right if you're looking at the back of the TV, or is it the board |