| Subject | Text |
| Can you move all 3 colors horizontally and vertically? Touch focus has to be initiated in the servic |
| KR-A4030 intermittent sound both channels | Can someone help?
My KR-A4030 has an annoying intermittent loss of sound in both channels. It's not |
|
|
| We don't clean the old grease unless it has gone hard, just wipe it off and apply a thin coating to |
| contacts no longer working on telephone | I recently recieved two cordless telephones, digital, that communicate with a corded base. On one, t |
| How to "unlock" a Ferguson... | Hi Everyone,
I am getting in touch in the sincere hope that you can help me.
My old mum has a |
| Basic questions about TV | I am repairing a TV for the first time and have no experience\knowledge.
-Is there really X-radia |
| Lol, I remember doing this as well. I'd crank the volume up, lick my finger and touch the pcb around |
| akai amp | I found another of this unit on ebay, not bid on for 99c and broken 7yrs. I got it eventually on my |
| Pioneer A 616 Mark2 | Some one have a servicemanual to this one?
Then i raise ore reduce the volume, the protection circu |
| Re: Soundtracs mixing board | Define "electrical" (smell of a charring P.C. board?, resistor?, transformer?, something t |
| Re: panasonic tv - URGENT HELP PLEASE | [quote:35c3b5b82c="pun"]my panasonic tv ct-32sx12 won't turn on, it was working fine yesterday.....p |
| Nak Pa-7 no power output | I have the service manual and passed on to tech (he had one too). He stated he verified all fusing a |
| Sharp Microwave Work/night Lites will not work | The Work Lite and the Night Lite on my Sharp Carousel R1491 will not light. The touch panel beeps a |
| microwave not working........help. | My microwave counts down but the magnetron is not turning on... At first I thought it was the touch |
| Hi i went a head and changed the Vert ic,and is not the ic,.Then i started to check around and foun |
| switch,need to press hard to operate it | hi there,i have a NAD CD player,but the feather touch cd open/close button now needs to be pressed h |
| Larger connections and the ones that get hot may have a ring around them from constantly heating and |
|
|
| pls check | hi, i think your problem is very simple if u r technical background just check door compartment care |
| INTERMEC NORAND 6642 DRIVER!!! | Hello
I have got tablet PC computer NORAND 6642.
Antyvirus deleted my all installation files. |
| Re: Dell Lattitude C600 - Wild cursor | [quote:2cca941a6a="jimenvais"]The cursor on my Dell Latitude C600 usually behaves at first, using ei |
| RCA's new service menu | I was working on a fairly new RCA projection (R52WH74) and tracked down the new service menu access |
| service mode unlock - last resort | The solution of my problem was removal of the CPU ( HD404919 ). Easy to locate visually in the middl |
| When I press the "close" button the tray starts to close then stops. The little piston tha |
| Harman Kardon AVR320 going into standby for bizarre reasons | For those who like an intriguing problem, please read on. My HK receiver, about 6 years old, starte |
| Hello, you cannot fix it properly thru the service menus. Luckily I've found a way to fix the bright |
| if your still struggling please get in touch,,they don,t come apart like that i,ll send you some pic |
| *Note: I would recommend either a VOM or DMM before you start this, since the rest of the troublesho |
| Yes, you can gain access to the 64 point convergance menu...but if you have an error, I assume no re |
| Do yourself a favor and just replace the STK ic's. You would be suprised at how many bad new boards |
| [quote:682c16038d="minnie"]There around 1.8 ohms by memory don't forget the jumpers 010 and 050. Als |
