| Subject | Text |
| pls tell what to do, to rivive my faguson tv | Please i have one faguson television, that has been giving me hard times. it dosn't pick power at al |
| denon udm3 | I have the exact same error, tray doesn't eject, no motors run, all other functions seem OK. If CD |
|
|
| Diagrams for Car audio | Hi,
I am looking for diagrams for the all the following car audio products:
[size=18:681f572 |
| JVC XV-THA30 DVD Surround Receiver Problem | Hello Techs
I have a JVC home threater model XV-THA30, upon power up, the front displays "wait" a |
| Philips 27pt5441/37 Voltage Issues | Hell everyone!
I'm in the process of working on a Phillips TV Model 27pt5441/37. The issue is the |
| What the chip that decode video(MPEG1,2) ? | What the chip that can decode video and interface to hard disk or ATAPI ?
I konw when build MP3 |
| I have seen the caps go leaky, basically turn into a resistor. it wont read shorted but when voltage |
| I'll always dip new tips in a bit of solder. So the tip gets a protective coating.
Also, when cle |
| Hi, HeVi !! - Re: HP Laserjet 4L can you clarify ? | Hi, HeVi,
Many thanks for the advice but could you please clarify...
I'm sorry but I'm a bit thi |
| It sounds like you have the IK problem with your set. Check red drive
transistors for leakage. It m |
| Hi! What long time haven't You used it VCR?
If long time You should check the drive belts and |
| ripped off | my philips 28pw6332/05 t.v. broke down and it cost me £112 to get it fixed
but when he gave me |
| samsung hp s5033 plasmahorizontal lines | same problem my logic board has 2 lights one flashes the other on all the time, [email protected] |
| "A03A" device and AR2 ?? | I have a device on a pcb, five pins, three on one side, two on the other, like a small dip with the |
| Well I finally was able to do the repair on this set. I ordered the wrong caps at first. I ordered t |
| I figured it out. Looks like I needed to use FDISK to format the disk and label it as LEC_HDD. I a |
| Pioneer SX 1250 Receiver manual and schematics? | I really have hard time finding it. Can somebody help me? Please! :cry: |
|
|
| zenith projection pv5236mk | after replacing flyback,drive transistor ,diode,2sk1532,fuse,i now have picture but no convergence.a |
| Philips 32PW6006/01 line stage shuts down after few seconds | Hi everyone,
I've got a sod of a TV set here which is puzzling me and I hoped that someone here |
| TV Problem | Hello
I have a problem with a Wharfedale Model M8 "28-INCH CTV. Not coming on due to line oscilla |
| Re: sony 2553 big problem ,funny pepole heads | [quote:1d2f6c60fc="niro"]my sony have a strange problem,i have a white line on the tv in the middle |
| Troubleshooting of Sony KV28WS3B | Good morning
After switch on the TV the picture appears after a time wich can be from 1 hour to mor |
| Re: four-pin SCR | [quote:79ff8222cd="dubs_suzie"]How do you test a four-pin SCR to know whether it is good or bad ?l[ |
| Thankyou,
It says that the hard setting compound (as used in monitors and such) incr |
| Sony boards | I would suggest buying another Sony unit off ebay that is either used and working or 'as is' but wit |
| Inkjet solid materilas printing | I would like to know if someone knows how to use a inkjet printer to print in a solid material (hard |
| ahhh I think you must adjust your horizontal linearity,its near at the horizontal drive section. If |
| Re: denon udm3 | [quote:01c6aab246="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
| toshiba model CE35D10 | I just went to the back of the tv and got the model #. If anyone can give me any ideas, it sure woul |
| Re: Yamaha RX-V750 | Hey there will try to help, The second click usually states that the post (Power on self test) has p |