Subject | Text |
eprom dump supra stv28p10 | tv name: supra
tv model: ST28p10
Chassis name: 11ak19p5 (printed on right side of board) on back |
Sony XR-C2300R | hi everyone.
I have a sony xr-c2300r car radio/tape with changer control.. fairly standard. only pr |
|
Is this really the same convergence fault? | I also have a 42H81 projection TV that has the two vertical lines spaced on the thirds. The lines ar |
How to "unlock" a Ferguson... | Hi Everyone,
I am getting in touch in the sincere hope that you can help me.
My old mum has a |
nikon d50 | good morning
I have my nikon d 50 that will not turn on I disassembled and I realized
that does |
Re: Matsui 1414R TV | [quote:8d4259a625="Flic"]Hey,
Recently been given this TV by my sister, who has unfortuanely lost t |
reading my IR remote codes. | [color=red:e810ffe843]
[b:e810ffe843]hello,
i have my stereo remote control and i want to read it' |
part numbers.... | Hi Minnie,
I didn't know about "partstore". Their prices are good. If they are listing |
Re: Please decode my clarion | [quote:a85b4c9602="macrosoft"]Model : PU-9971 A
Serial number : CL0267V0123062
Thanks[/quote:a |
tamiya and powerpole connecters | I have been using Tamiya connectors for hooking up batteries and it has gotten very frustrating beca |
Re: LCD TV display problem with computer | Try going in display propreties and Leting the computer update the drivers and make sure under displ |
| Hello, set the VCR in AV mode with remote control.
Regards, sonyk |
TV Sony KV-29C5B (FE-1) Green picture | Hi everybody,
I have a TV Sony KV-29C5B (FE-1),It work fine except that the picture is a little b |
Grundig CUC 1825 problem | I have Grundig cuc1825, after replacing procesor SDA 5250, TV won't respond to remonte control !
Wh |
| http://www.eserviceinfo.com/download.php?fileid=5556
http://www.eserviceinfo.com/download.php?filei |
| Hi,
You should split it into files smaller than 2 MB
I suggest using WinRar
greetings: Plam |
| [quote:5a5876d182="Anonymous"]I traced back to the input of the motor control IC (SIP #BA6209N) pins |
|
Help, I am having problems with my Sony STR-DE945 | My Sony STR-DE945 audio receiver has just begun to get tempermental in it's IR remote control area. |
re; too bright | Hi, try turning the "screen control" counter clockwise a little, I
don`t work on monitors so I`m no |
Denon stereo component D-120 / 70: how does it work??? | Hello Friends;
Re: DENON, STEREO COMPONENT D-120 / 70
I bought this radio from someone who w |
WAP Service Manual Search Machine | [url=http://wap.eserviceinfo.com]WAP Service Manual Search Machine[/url] -
Check the availability o |
| Thank you for taking time to help me....Ive tried the mute 1 8 3 using the remote but the convergenc |
| The excessive heat, probably from the output stages is likely due to excess current through the driv |
| Breakthrough
I figure out how to get into factory mode, once you get the Go to Factory Mode to |
| It doesn't really matter, but I would suggest not using a hard setting heat sink compound for any un |
celestial remote code | Hello,
Your remote doesn't seem to have a specified code for a Celestial TV, but you can try to fin |
chassis 11AK20M-3 ???? | First forgive my english , I write from Spain.Now my case:I`ve got a Tv set 14" Basic Line Mod:BL-37 |
Re: Hi Friend | [quote:f08ef1f417="VIDEOCARE"]Hi
in sony colour tv put it in standby mode and prese slepe mode i |
14PT1532 /94S ctv went off suddenly on service table | this chassis uses
MC44603 AP powersupply
TDA 7056B audio
TDA 8841 S1 signal processor v h |
Tektronix TM 515 w/ PS 501-2, SC 501, FG 501, DM 501, DC 504 | I have a Tektronix TM 515 mainframe with the following plug-ins. Due to its portability this unit i |