| Subject | Text |
| Replacing a power supply... | ...consumer electronics product: Audiologic color tv/cd/radio portable unit. I burned the power supp |
| Replacing busted DVD Player with a PC IDE, DVD ROM? | Hi all,
Does anyone have experience with replacing a bad DVD loader in a DVD player with an inexpe |
|
|
| more info on replacing the parts directly | I have some help to give if you have the exact same problem.
When you power up the screen, brief |
| Done replacing DSP capacitors | Hi,
Replaced the capacitors, and it seems to have worked fine. Verified sound in at least four c |
| Replacing a Hardrive on an acer extensa 501dx laptop | how do i take the laptop apart, to replace the hardrive, I have unscrewed everything but it seems to |
| Need help with replacing a board in a lg plasma | Hey guys
I just joined up here. I was given a LG plasma t.v (42PC3D) because the screen stopped |
| How is the set stuck in standby? Are there any sounds coming from the back of the TV when you switch |
| 50" zenith tv convergance issue | I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, |
| Do not have the T-230 schematic, but I think it was similar to T-240. As far as backup on any digita |
| data sheet | I was delighted to locate a data sheet for my MASTECH M-830b multimeter.
I have blown R5 and R18 an |
| Ever since televisions have switched over to the modular system, finding specific diagrams are rare |
| [quote:d3bff1203a="jts1957"]R561 should be [color=red:d3bff1203a].33[/color:d3bff1203a] ohms betwee |
| Toshiba SD-V291 VCR/DVD combo ejects tape immed after load | Hi. Above noted machine loads tape, but then imediately ejects the tape. I removed the cover and t |
| Sony CCD-TRV43 | I need a service manual for a Sony CCD-TRV43 camcorder. Also, need advise or tips on replacing the |
| hello. does anyone having any ideas or advice? anyone having any troubleshooting tips, or should i |
| Based on your description, the diode in question is perfectly fine. I have never heard of it being c |
| @Guest | @guest who recommends to replace all caps of the vertical driver unit
Okay, I agree that might be t |
|
|
| Xbox 360 wireless reciever | so this is a chinese knock off right. I have used many of these in the past, but none gave me any tr |
| Hv u check the vert. IC? I had a similar probl with a JVC 21" and fixed it by replacing the IC. :D |
| zenith projection pv5236mk | after replacing flyback,drive transistor ,diode,2sk1532,fuse,i now have picture but no convergence.a |
| Mine broke too.
One thing is for sure, they have indeed inserted bad quality caps in this model. |
| updates... | Ok, I've since disassembled the set and found another label at the top of the CD transport:
"TCM1 |
| Look through thesev and see if a plausable match exists | JVC AV2000 N/A NO SOUND OR PICTURE - BUZZING SOUND FROM SWITCHING XFRM. - HIGH VOLTAGE BEINGS TO COM |
| Yikes! Now it's getting complicated! I found the Power Transistors and ordered them through
htt |
| Try replacing your vertical IC. |
| Hi,
The clicking noise maybe due to your power supply trying to fire up ('click!') only to cut it |
| EXPLANATIONS:
X-SUS (or called also z-SUS)
and
Y-SUS are complex circuitry that are deliveri |
| Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter an |
| re; vertical | Hi, you have bad electrolytic caps in the vertical circuit, usually
replacing ALL the defective one |
| [quote:5a5876d182="Anonymous"]I traced back to the input of the motor control IC (SIP #BA6209N) pins |