Subject | Text |
| COULD BE THE LINE OUTPUT TRANSFORMER BUT I HAVE ALSO HAD THAT FAULT CAUSED BY THE FRAME OUTPUT IC AN |
Proscan service manual | I work at ACE TV in Las Vegas,NV I need the signal board secondary power supply schematic. Voltage t |
|
| Your TV problem is at horizontal synchronization and can repair.
If you have schematic, you can see |
chasis a10e philips | Hello
I want to change the chip painter position 7064 (micro) of a chassis philips A10e
I nee |
Re: KVX2982U Sony Trinitron TV - No remote functions | .
ant12345,
Here is a suggestion:
1. Remove the batteries from your remote.
2. Carefully o |
cd wont eject | I have a Teac Micro System MC-DV639 all the functions work but i just cant get the tray to open.Any |
Wharfedale 890 - PT92 Chassis | I have one of these sets, which is not responding to AV control signals:
Firstly, it does not ent |
PHILIPS 60P8341 PTV915 | i have a philips model 60p8341a chassis #ptv915. it keeps shutting off by itself. i was told it was |
washing machine repair | any one suggest or quote a good book/s /cd/video covering circuit schematics of micro controller bas |
Pansonic CT36SX12F | Hey...forget about it. I have the same TV in the shop right now and they are telling me it's the mai |
| Replace all micro switches on front. |
| Hi
Don’t think about the colors (values) of the resistances, be sure.
The resistor 1 is 560 Ohms & |
| check the fan is rotating freely, the grease often hardens in the bearing and inhibits the rotation, |
| according to hitachi it has to be an original as it is the VCR functions of the original remote that |
| SI-3000 series are 5 legged adjustable regs with xtra control pins.
SI-3090's were typically used |
LCD Screen Not Working Yamaha Hi-Fi System | Hi
The LCD screen on my Yamaha CC-5 Micro Hi-Fi system has recently stopped working. Here is a pict |
| A lot of times there is a board on the front and there might be a big surface mount ic on it usually |
|
| Micro or flyback. |
Banished mod minnie | Take your camera phone to the front of the remote and see if the led lights. This will tell you if i |
www.circuitseed.com | this website will show the schmatic electronics circuit ,software micro tools
can you experiment at |
Re: Polishing of Silicon wafers | [quote:c090204838="Saurav"]Hi,
I have come across a technological development where we are a |
nec plasma | Hi Bob
This sounds like the unit I have here the PX-42XM1G
it also had no fans but power 170/80 |
| Resolder or check for dry joints between the IR sensor upto and including the microcontroller chip. |
Re: 42" digistar plasma screen | [quote:0786074833="rushman"]I have a digistar model 4210D, it takes 5 0r 10 minutes for the screen
|
RCA CTC203AC4.F25422 | Hi guys, this set RCA F25422 CTC203AC4, has a farely good pic and sound, but has this fault that i n |
Re: jvc service manuals for free | [quote:545fae242b="jims"]i have a wide variaty of jvc service manuals I can send to anyone who needs |
Re: Audio problem with RCA TV | [quote:b1e59e1e9e="tmahdavi"]Hi,
I have a 32" RCA TV which recently started having audio pro |
JVC UX-1 | So my friend gave me JVC UX-1 micro component system for repair. My starting point is this:
http: |
cd wont eject | I have a Teac Dvd Micro System MC-dv639 and the cd wont eject.All functions work it just wont open.A |
Re: denon udm3 | [quote:01c6aab246="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |