| Subject | Text |
| i got this from the web dead d15(by299) d28(by299) r711(2k7) so you will need to check d28 and r711 |
| There could be two failures:
1) There is a secondary short. (most of the times the PSU will make |
|
|
| Also, see if it still thumps if you turn the gain all the way down before powering off. If not, the |
| Sony KV2150R help please with repairing this set. | The Stand by/timer LED keeps blinking all time, I have changed the full block of power supply from t |
| Re: some tips for you!!! | [quote:2b6592037c="eduard0476"]first of all i would like to know your Unit.. this is CRT TV type or |
| Need help identifying components please. | I have a Creative Labs Inspire 6700 6.1 speaker system for my computer. I turned it on the other day |
| Int. Philips | Hello,
Below find my only database entries for the fault you describe.
1/ TV set starts up and |
| Denon UD-M3 CD tray eject problem | Great stuff. Another one fixed after not working for well over 4 years. Used a 20mm panel fuseholder |
| I do not think you can do that in a cheap way.
If there is such a device (which i doubt) the price |
| Thanks for correcting me. But what do you call that peice of glass that burns Red when you turn ON |
| Re: rca 46 inch again.... | [quote:73d50fc6d4="jloy1"]so in my previous post i had a high voltage arc from the center crt to the |
| I call dish network dish dish no work. S video bypasses the tuner. There is no luminance correction. |
| Been a while & strictly working from memory;
I use to see this on a daily basis and am rather |
| STR-DE598 no display from using wrong speaker (dead) | hi , new to the forum but hope som1 can help , got this str-de598 from a friend who clams to have pl |
| I have seen the caps go leaky, basically turn into a resistor. it wont read shorted but when voltage |
| Could you check if there is any voltage e.g. on the collector of the high voltage transistor?
A b |
| Audio amplifier limiting output power | What I have:
• A transformer rated at 150VA / 30V (center tapped) / 5A
• Speaker rated at 30W / 8 |
|
|
| Analogue radio repairs | Radios for hard to fix radios
GP300:
Fault…. Doesn't turn On (Dead radio)
1/Check Fuses
2/Resold |
| Need schematics for goldstar | Hello,
I´ve a problem in tensai Tv that dont have high voltage and i´m new in |
| Defective HDTV | Hello,
It is sad to say, but I think you'll have to take your tv to a technician...
When you pow |
| [quote:d7cf46b57b="absorbentgnome"]The HT (high-tension) transformer is the transformer usually refe |
| freshers and experienced Job opportunities | Dear friends,
Please visit our website www.electronics2u.net which deals |
| Yes, if the discharge is of high enough energy, but in normal circumstances - such as those which ca |
| re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
| Hi. You must to repalce high voltage transformer for backlight. I saw some on ebay. |
| MAG 770FS 17" monitor | [b:ab1a07bf79]I have had this monitor less then a year for my wife so she could keep her surfing hab |
| Sony Plasma | Hi all, my first post here.
I have a faulty Sony Plasma TV and was wondering if it is safe to dis |
| Re: problem with tv sony KV-C2981D - ERROR CODES | [quote:47d7ac3dc7="riki"]When tv is started for very first time in a day,there is no sound and pictu |
| I'm going to assume (dangerous thing to do sometimes) that you are reasonably skilled at disassembli |
| Re: PARTS FOR SELL MORE THAN 1600 references | [quote:3b9ee7b0e9="DANIELTECH"]Transistors, mos, IC's, opto, high power modules, new and used worldw |