| Subject | Text |
| SMD Rework station 852d | Hey Guys ..
i just Made my account. i have a problem i have SMD Rework station 8 |
| CT-858 rework system | Hi,
does anybody have schematic for this rework system?
Please help
Thanks
solec |
|
|
| Lodestar L502850 rework station, no air, fixed | No air output, no pump, no LED on air side.
Problem traced to 220uf 16v C6, relay drive anchored to |
| Electronic rework products shops in London | Hello All, I am looking for shops in London (all zones) selling soldering stations, irons, solder, f |
| This fault is normally due to the painter IC on the SSB panel which can give you some very strange f |
| re: solution | This heat gun and hair dryer methods might work sometimes. It is taking a chance bacause the uneven |
| Panasonic TX25AD2 Screen flashes continuously from boot | Hi I have a Panasonic TX25AD2 television. (UK PAL CRT). Upon switching on set the display flashes. A |
| hi, the samsung sounds like a vga chip fault, most likely a dry joint. i expect it is a bga chip whi |
| :) Okay: lots of folks experience these type of problems after a move. and they do just what you did |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| RCA Ctc185a7 | I have here a chassis ctc 185 that has no sound good pic ,checked volts at ic 902 and it's ok, i' |
| Weller AG701-S | I need the manual/ service manual for the Weller AG701-S Rework Station. |
| I'm lucky that repair and maintain wide variety of equipment including pneumatics - I also get to w |
| Daewoo PDS4250 42" Plasma Colour Issue | Hi! I've registered here, hoping someone may be able to help me. I repair laptops for a living so am |