Subject | Text |
| I have tried this, and all connections are good. if leaving it it will get to proper volume, stay fo |
Mackie SRM450, signal and peak led on, no output. Fixed. | Hiya
Just repaired a Mackie SRM450 with thermal and signal indicators always on. R282 and R283 10 O |
|
Need to fix JVC amplifier | I have a JVC A-GX2 stereo integrated amplifier in my living room that needs to be fixed. The unit po |
Toshiba 32C3035D | Hi- am fairly new to this- could someone please do me an enormous favour by posting or suggesting ho |
amp | i got an Holmes tech 450 power mixer,pa the unit has an hum noise,plus i,m looking for the schemati |
| only reply ive had is
[i:c8398d0a40]only thing I could figure on is that there is a circuit break |
Lem Pegasus 118 | Hi all!
I want manual service for powered subwoofer Lem Pegasus 118.
Thank's in advance! |
| Thanks for that. I took it all apart and have lubricated every moving gear, but unfortunately even t |
| New discovery. When I leave the unit on for more than a half-hour I can press the buttons a few time |
Kenwood sw-32ht schematics | Does anyone have the schematics for Kenwood sw-32ht powered subwoofer :) |
pmx 5000 b output | My mixer has an output problem where channel or output b clips or power comes and goes,and can and i |
Archos 705 80GB WiFi Multimedia Player For $280usd. | Hello,
We Are Registered Company Called:
IDIG COMPUTERS LIMITED.
WE ARE WHOLESALE DEALER OF ELECT |
Dead Dell 1025HE | I'm attempting to repair a Dell 1025HE 17" monitor (essentially a Nokia 447S) for a friend.
sympt |
eMachines M5116 laptop - no CPU CORE voltage... | Hi,
Maybe there are some engineers on here who carry out laptop repairs?
I am trying to repai |
| Try checking the Solder joints of the higher powered components. |
| 1) Did you press "crest century gtx mixer_.zip"?
"0" = part 1 "1" = |
Denon DN-X400 schematic needed | Hi,
Does anyone have a schematic or service manual for a Denon DN-X400 DJ mixer
Thanks. |
|
dell m992 clicking on power up | HI there
Im having a similar problem with the same model - when powered up it just ticks so im gu |
Compaq Presario 1700 won't boot up. | I was given a 1700 from a friend that won't boot up at all. When I press the power button the lapto |
Infinity TSS-450 5.1 Surround Speaker System..diagnosis help | Hello,
I recently bought this set of speakers at a yardsale...
Infinity TSS-450 5.1 Surround Speak |
TV with black, jumping lines which stretch the image. | Hey all!
I've got a question about my good ol' 28" Sharp TV (28HW 53E). It's getting quite o |
Subwoofer Half Works | Alright so here's the situation.
I bought a KRK 10s subwoofer from a guy for really cheap. He sai |
| [quote:20c42c88bc="joshg3p0"]I can test the other transistors for short. I think I did that, but I'l |
Radio and electronics cookbook | I have just built the Colt 80m receiver from the book. It worked ok when i tested the VFO and Mixer |
sticky controls | I dug an old Ross Mixer out of the basement and several of the controls were hard to turn, I tried t |
mhc vx777, "protect" "push power" | ... i have this mini hi-fi stereo component. when i powered it up, the display reads "protect", "pus |
Sharp 28LF92H power cycling | Hi All,
I have an Sharp 28LF92H that is power cycling (red/green) LED constantly it has powered u |
Konka 2068U | This konka model 2068U never powered up after a power outtage. I examined it and had to change the v |
Couple of quick checks... | First I would physically look into the picture guns. Powered down of course. You are looking for a m |
Technics SA-EH560 power amplifier | Just replaced the 6ch Hybrid power IC while connected back to the rack remains in standby however;on |