| Subject | Text |
| flyback transformers needed | Need ACER 19.70052.001 for ACERVIEW 7277c
also for EIZO FLEXSCAN F56 monitor MSU1FUS17 or
MSU1FUS1 |
| NEC 61mp1 (plasma) w/various stuck vert lines on bot 1/2 scr | I recently acquired an NEC 61MP1/61MX1A that has several vertical columns of stuck pixels (some R, s |
|
|
| Re Finlux 1000 | I had the same problem about 3 years ago with this model.
Check continuity of line scan coils..shou |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| Sanyo CE28WN5-B no picture/sound | Hi all,
I have the above TV which does not do very much at all. When switched on there is no soun |
| Ok the only standing metal boxes are 2 tuners, 1 p in p module, and the convergence assembly. I know |
| Mag 810FD too bright | A hand-me-down from a friend. The monitor is too bright and adjusting brightness and contrast can't |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| Check to se if your dvd is in progresive scan mode. You can tell if you hook the green connector up |
| DVD Player | Hey!! i give you some tips with your problem to your DVD Player... ok just open it your DVD and when |
| hola yo tengo el manual de aiwa wx 220 si alguno lo necesita lo puedo escanear en su idioma scxslot@ |
| They told me how to scan to find a code, but that method wasn't successful either. I gave up and pu |
| After degaussing, you may want to check all of the supply rails and filter capacitors. It sounds lik |