| Subject | Text |
| If it dropped hard enough to 'flex' a board, Panel may be problematic. |
| Beko chassis 12.1 tuning doesn't stop | Found out a little more. The I2C bus controlled Video Processor chip has an output registor read, du |
|
|
| Schematics for JVC AV-27820 TV | This TV lost its vertical scan. Does anyone have a schematic for this TV so I can fix it?
Thanks |
| BOSS / ROLAND BR-8 Multitrack Recorder | Hi All
I have two Boss/Roland BR-8 recorders that have the following symptoms:
Erratic behavio |
| [quote:94b4285df1="gary"]IF THE LINES ARE VERTICAL IE TOP TO BOTTOM THEN VERT STAGE IS OK AND FAULT |
| Re: STR-DB725QS | [quote:80f4106bc9="onkel.tom"]Hi Andreas
Have the servicemanual you need.
Check the solderpoints |
| Beko 12.1 chassis tuning doesn't stop on strong signals | Hi all,
This Beko 14213T (chassis 12.1 with UHF only) just continues to scan over all signals. Chan |
| [color=red:ae444898fb]Special offer:[/color:ae444898fb]
This DVI to HDMI cable is designed to insur |
| JVC download worked after all.... | Hi!
And thanks to all...
I disabled Norton internet security and it worked...
I would like to sha |
| Sony KVX2182U | Hi, ive had this tv for quite some years now and it had started playing up, then got put to one side |
| Picture squeezes horizontally | Make and model of set would normally be required for more detailed diagnosis.
With the set unplugge |
| Pay attention to the area of the red arrow which is the arm that activates the disc lift pickup. On |
| ICF2001 service manual | A zipped, complete scan of the manual can be found here:
http://perso.wanadoo.fr/michel.terrier/r |
| PX-42VM3G | Hello Pinkwell,
Can you tell me 3 numbers off the Panel :-
1) NP42********* (I think it should |
| JMBNO28WSS | :cry: :cry: [b:92398e8700][i:92398e8700]We have this model set which has had a burn up on the main |
| PX-50XM1 (50MP1) | All,
Just so you all know, below are the pcb labels from the scan board of the 2 capacitors which |
| the set has dry joints, try resoldering the line output and drive areas of the tv, also on those set |
|
|
| Parts like that for just about anything electronic take a lot of skill to find, IF the part is avail |
| Stereo Manual | Hi,
I have one of these units for sale on ebay, it comes with the manual and cd changer. so let m |
| Can you get to the B.I.O.S. screen and does it stay on?
Try booting into safemode, press the F8 ke |
| 4 flashes is no vertical sync, check ic501 and related parts, it may also be worth resoldering the r |
| Replace the flex converter. |
| [quote:c55a756509="jts1957"]If it dropped hard enough to 'flex' a board, Panel may be problematic.[/ |
| More than likely main chopper transistor(FET) is shorted which may or may not have taken out other d |
| It's probably faulty capacitors in the vertical scan. First overview would be to visually locate an |
| Re: service manual pioneer sx 950 | [quote:44c8db621d="joey salvatierra"]i need a service manual for my pioneer sx 950. its has a power |
| NEC PlasmaSync 4210W | I guess this is your lucky day, or maybe not. The reason your plasma unit keeps going into protectio |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| Some short the pads, some use metal clips across end of flex wire (or plugged into a socket).
htt |
| factory settings | How do you put the Sanyo CE27LD3 - B back to the factory settings?
I have just bought this set and |