| Subject | Text |
| Ok. I forgot to add something. I've measured the KR KB and KG on the pcb on the CRT. If the board is |
| 50" zenith tv convergance issue | I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, |
|
|
| Sorry , I tried to edit my original post but I can't login . Here is what I've found out :
1 : The |
| intermittent tsjirping sound Neufunk TV | Yes, i just replaced thr transistor to fix. As to how to locate it, i had the benefit of a similiar |
| Is it possible to attach a photo of the circuit board here? Unplug it and measure everything with y |
| No, I don't have it. But thanks for the idea. I once had a PC motherboard which has strange behaviou |
| Your dead TX100 chassis Tv | As well as the good advice given by last poster, check/replace the Polyester/Mylar Capacitors across |
| Ummm what you guys said makes no sense I can't find any way to make something popup called factory s |
| [quote:7c03f7aab0="jts1957"]Jumpers, especially at locations 010 and 050 - resolder. Check F850, F85 |
| Mitsubishi VS-45609 | I have a Mitsubishi VS-45609, manufactured April 2001.
Yellow and Blue shadows appear in the pict |
| SHARPY T.V trobelshoouting | HI friends
I have a problem with my 14'' sharpy colour tv from made in shina.
it was stop |
| Studioworks 775n (CB775BN) brightness adjustment??? | Hi all,
My monitor brightness controll is 100% on the OSD & my monitor is still darker than it |
| Thank you for a quick answer Mark.. :D
Yes heaters are working an I can feel and hear static whe |
| Yes, you can gain access to the 64 point convergance menu...but if you have an error, I assume no re |
| Switch Ohmeter 10x you check D with S pin and change the pin again ,result the meter swing to high s |
| Capacitance meter. I have a fluke 175. You can find a capacitance meter on ebay for cheep. |
| how tocheck this transister sta 353 yy3 | how tocheck this transister
sta
353
yy3
what type of this transister
how to check its |
|
|
| NEC MT800G picture fault | Hi
I have problem with my NEC MT800G LCD projector, the picture are
"distorted". No fault with the |
| Take off the back cover and there should be 2 adjustments on the flyback. (Usually right hand corner |
| Mike,
I am not familiar with the specific model but more likely you have a power supply issue. Disc |
| 400 volt capacitor how to know its leckage or damaged | The best way is to use a ESR meter but a standard capacitance meter would work also but not 100%.
A |
| 400 volt capacitor how to know its leckage or damaged | 400 volt capacitor how to know its leckage or damaged
one day my own digital satellite reciv |
| Re: Philips Magnavox 9P6444 64" RPTV has Green Haze | [quote:b1dfe1bdba="NTL1991"]Hello. I have a Philips Magnavox 64" Rear-Projection TV that was ma |
| Hi,
Sounds like vertical deflection problem.
I would focus on the frame (ie. vertical) IC and |
| 6-year old Sony rear projection tv model( kp-53s75) | Currently my Sony 53" tv has suddenly lost its picture quality. The colors are not converging t |
| Re: Tape dack made by technics RS-TR373 does not play sound | <span class="notranslate" onmouseover="_tipon(this)" onmouseout="_tipoff |
| Re: philips 25gr | [quote:f15e5ef5bb="polaret"]Hello
I have a philips 25gr TV and the problem that i have is that aft |
| For Sale: Keithley 178 5 1/2 Digit Bench Digital Multimeter | For Sale: Keithley 178 5 1/2 Digit Digital Multimeter. It is a lab quality digital multimeter with a |
| Thanks for the input, I was able to get the laser focus to work, and then it crapped out on the sled |
| Hello, you cannot fix it properly thru the service menus. Luckily I've found a way to fix the bright |