Subject | Text |
Thomson 28VK24U (ICC17 chassis) LOPT Questions | The Thomson part for the LOPT is 15314460.
Replacement LOPTs are available, as are LOPTs with mod |
| Phillips part #PCE001716680001 is the fluid kit. RCA sells it also. Phillips kit comes with 3 tubes |
|
Damper Diode Question | I have a sharp microwave that cooks on high regardless of power setting. I've traced the problem to |
| A few things, PC and PD are important but not have anything with the DVD not working. PD and PC are |
Canon MP160 Daeth.... | [b:45c6f7ce05]Dear All...[/b:45c6f7ce05]
:D
I have a Death Canon MP160,no led,no buzz sound. |
Re: Polishing of Silicon wafers | [quote:c090204838="Saurav"]Hi,
I have come across a technological development where we are a |
How to enter to service mode????? | i'm looking for the procedure to access to service mode at these TVs:
Hitachi C28W410SN-311, BEKO N |
| Customer convergence procedure NOT working?
If Not change the convergence ICs, check bias resistor |
Re: Philips TV 27PT5441/37 | [quote:7ba3e84ecd="ron"]I have answers to your blown fuse problems, click on the original
complai |
NEW 400W FET AMPLIFIER | Hi all
I have found this kit very interesting ...so I will share whith you.
[url]http://www.e-elec |
KV-35V36 | All parts are correct Sony parts on this KV-35V36.
Right boards in the right set.
The G board repl |
| There are many simple remote control units aimed at hobbyists, available at distributors like RS Com |
volts for relays | hi,i have a problem on my yamaha rx-v392 model...i need to know what is the voltage of the relay in |
New Teac DVD Receiver DR-H358i and Predecessor DR-H300(DAB) | Do you have a Teac DR-H358i or DR-H300 (with or without the -DAB suffix)? Are you thinking of gettin |
Re: SABA | [quote:48d591f1f4="omegald"]I need service mode procedure for the same product T70170RI. If anybody |
Entering LG TV Model:RT-29FA31X Service mode | Hi, can someone advise me the procedure to enter into the svc mode using the remote control. I need |
Need Service info for Samsung HCP-4752 | Dear Person:...I just finished replaceing 2 bad convergence IC's in a Samsung HCP-4752... On was act |
|
Need wiring diagram for Ph.32pw6006 | Can anyone help me.
I need wiring diagrams for my Philips 32pw6006.
I have just bought the repair |
| After a little research, it seems there are two likely candidates for this problem.
I gather that |
JVC AV-35BP3 Schematic Needed for Charity Work | Need a schematic for a JVC av-35bp3.
This is for a set donated to charity.
Symptoms: DOA, rel |
Daewoo black screen | I have a Daewoo DTL-28G7S with CP-776 Main board. The TV tries to start but shuts down. When I start |
| Hi,
The clicking noise maybe due to your power supply trying to fire up ('click!') only to cut it |
feedback through speakers | i have a mitubishi vs-60609 i replaced the convergence ic for a red covergence issue and checked dio |
| ok I put on the new ps and tv works but I hear what I think is a loud buzz from the y sus. I turned |
Resetting a canon i250 after a "waste tank full error&q | Could anyone tell me if the resetting procedure for a Canon i250 is the same as for i320.
Or if any |
| the option codes set the parameters within the set ie how many scrarts it has, the type of tuner, wh |
| [quote:6e582d2097="gary"]IF THE PROCEDURE ON PAGE 5 OF THE MANUAL DOES NOT WORK THE EEPROM WILL HAVE |
| A transistor takes time to turn on so if you play music into it you will miss the quitt sounds and t |
| Hi,
Thank you for your kind help John.
Since it's chassis L01.1E, I will check diode 6406.
|
Panasonic VCR Message F04 | Hi!
The link is below.
http://www.eserviceinfo.com/downloadsm/9064/Panasonic_K-Mech.html
I checke |