Subject | Text |
| Is this external power supply or build in?
If it is external, just buy an adapter with proper power |
| Not possible. I assume it has a 7" screen. The cost of that panel is very likely over $300 and must |
|
| [quote:6a60d01696="Anonymous"]It's most definitely a connection problem in the filament circuit for |
| I am only guessing but maybe the CMOS battery went flat. Can you go to the BIOS settings and check t |
| More like "Dealer Lock on"
#1 Turn the DVD player on.
#2 Press the Stop button on the front pan |
| Mark and Guest,
Your comments are highly appreciated. I think the little spring belongs to the doo |
sabotage! on zenith PV4661H | :? I given a zenith projection tv after it left a service shop and they couldn't get it fixed so I |
| [quote:8f6aaec432="."]Atom: I think trinitrons are still the only real flat crt's. The others I see |
| I realize this post is old but...I am curious if anyone knows the outcome if it was bad solder point |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
diagram | I have the crt panel-diagram.I can send it to you if you like.
PS : 1)also check the vertical def |
toshiba 32ZD26P tilt is off? | I don't know about this set but my colleague and I installed a new t.v once to a customer and notice |
| I think I have identified the problem. its either bad soldering or a faulty component. When using a |
help finding ribbon cables for sony dvp-nc655p. | hello again! i managed to screw up the two flat ribbon cables that connect the laser assembly to th |
| [quote:9ffc30e0c7="Anonymous"]Hi minnie. What can be bad on a such main board to produce a such effe |
Sanyo 27" TV Problems | Having problems with TV signal coming from Satelite decoder. Signal keeps coming and going. Not a sa |
yamaha | hi
After u check the all channel - There isn't any shorts.
On the front board ( inside the panel ) |
|
VERT:PROBLEM! | CRACK OPEN THE SET!(BESURE TO HAVE THE SET UNPLUG)..,UNSCREW THE FLAT CIRCUIT BOARD , AND FLIP IT OV |
Monivision dm-5952s schematic | Hello
I am Hoping someone out there can assist me.
i have a Monivision DM-5952s monitor
this i |
| Service mode:
With TV ON Press simultaneously OSD button on TV panel and
Standby button On remot |
bushnell trailsentry camera modification to circuit | Hi all,
I'm new here, not sure if any one can help me with this?
I have a bushnell trailsentry c |
Replaced TV | Ok well for the first time in my life I actually had a warranty and got a replacement TV. They repla |
| If the radio is running the battery flat, you must not use that Fiat very much (or unit comes on at |
Screen Picture in Zoom | Hi
ONIDA TV 21" Flat Color TV
Isme Zoom over hai right aur left side ka picture nai dik r |
| very common fault on this chassis, ic7064 on small signal board needs to be replaced, also known as |
Blaupunkt APS 2 schematics or rear socket diagramm | Help!
I need this APS 2 schematics or rear socket cabble diagramm.
The machine leaked. I cleared |
| You can try and clean the contacts on the LVDS cable going from the digital main board to the top tc |
| Can you get access to the rear of the television to tell us what chassis is in your TV? Usually it' |
Protect LED | My Hitachi 50FX30B had been dead for quite a while, but this weekend I took some time to go over it |
Hi pls help | I have a philips real flat tv model 20pt6441 and the screen is all off like it cutts of picture etc |