| Subject | Text |
| When you open up the laptop, you will find that power jack (DC socket) is situated at the back end o |
| Sony KV-27TS27: Excessive White | I have a Sony KV-27TS27 (SCC-E54A-A chasis) that had poor colors (whites that were black, reds that |
|
|
| The soldering iron is a Pace IR30. Does any body have one lying around their workshop or an altrern |
| It could be power related, there are filter capacitors after the rectifier diodes and usually small |
| Yikes. No idea how to properly use a soldering iron. I was hoping the resistor would be able to be |
| [quote:d7e50bb691="georgeNCSUee"]
I now know that the spindle motor is probably the cause for it |
| I have repaired hundreds of the ford radios, i repair car audio for a living, you need a soldering i |
| NEC plasma giving half screen | Does anyone have that information about the half screen issue? My 50 inch television finally took a |
| Now sometimes you'll have a screeching noise that is a sign of excessive horizontal ripple from a dc |
| [quote:2be1234afc="airhead_1"]Good morning - The problems on all of the P30/P35's that I have fixed |
| O. K. with your not particuarly having an URGENT need for that particular boards features, which BTW |
| Parts can be gotten from http://www.tritronicsinc.com. You'll probably pay more for shipping than th |
| What happens when you tap the monitor on the top with your fingers? It may be just a simple solderin |
| Re: I repaired my N3250w thanks to JRnTX | [quote:90c6317b95="twerq"]Read through a lot of posts. Seems power problems with the N3250w is eith |
| Service Manual Info. | Hi guys,
I'd like to know where can I find philips, sony, LG, samsung, Kenwood, hp deskjet and la |
| soldering always getting a dull finish, dry ? | hi,
i bought a soldering atation and doing a bit of soldering work on a curcuit board,\
howeve |
| :D you need to remove the shield on the bottom of the tuner section. if you still have the broken rf |
|
|
| magnavox MS3252S431 tv shutting down...among other things | hello,
my MS3252S431 (L01-1UAC-7638 chasis) 32" tv has broken down for the 3rd time in 18 mon |
| Thanks,
I will get a hotter iron then, and try again. |
| surface mount soldering techniques | Has anybody got some surface mount soldering techniques
The first way I was taught to replace sur |
| yes its bad on both. I've spoken to a friend who has the rquired screwdriver to open the unit and a |
| [quote:5438d89434="Anonymous"]Line OutPut Transformer earth would be under the Line OutPut Transform |
| LG 44SZ21RD IS AN LCD REAR PROJECTION TV, TRY RESOLDERINGTHE FLASH ROM IC2 ON THE VERTICALLY MOUNTED |
| Toshiba 32A10 | Update:
Found a block diagram of the Toshiba TMPA8700CPN micro proc (QA01 in
the schematic). It |
| KENWODD KA-501 AMPLIFIER | NEED SCHEMATIC FOR KENWOOD AMP. KA501
THANKS IN ADVANCE |
| more info on replacing the parts directly | I have some help to give if you have the exact same problem.
When you power up the screen, brief |
| Re: Dell Inspiron 1150 Motherboard Circuit Layout | [quote:083b251c22="Anonymous"]I have just replaced the power jack connection on my laptop due to fal |
| It's a very good news to me that 14.6V is acceptable as 15V line and that the chase for relay issue |
| There is no problem using radial mount. As far as the short legs, you need to have a small tip sold |
| orion | Oh ya sorry, I have an Orion model# STV2750 and all I have is a multi meter and soldering iron.
Tha |