| Subject | Text |
| I have resoldered joints in that area but nothing happens, so what components can be faulty. there i |
| No, no back light or sound.
And no, when in standby the light is orange, but turns white when you |
|
|
| Need Schematic for a NEC PlasmaSync 4210W | Need Schematic for a NEC PlasmaSync 4210W
or service manual
the problem is that. when I turn the p |
| Samsung TXN3275HF blown fuse. | My Samsung TXN3275HF blowes the fuse on the board when I turn on the TV. Some times it works fine an |
| There is no full transformer or galvanic separation in any LED or CFL light bulbs, but there should |
| I have gone over the board looking for the usual, damaged transistors, damaged diodes, resistors out |
| Service manual Sony KV27V65 chassis SCC-S03K-A (AA2) | I'm looking for:
Service manual Sony KV27V65 chassis SCC-S03K-A (BA-4)
TV recently died – whe |
| goodmans 28" widescreen | i have this goodmans 28" widescreen chassis 11ak19b-1, i dont know the model no. does anyone? its fa |
| remote control URC24 | Hello,
These universal remote works fine on most devices !
First, you have to program the remote |
| Problem with Kenwood AA3 | Display does not light. Power LCD is blinking. Please help! |
| How do I make my windows open automatically? | Okay, I love the outside and there is nothing like waking up with freshair and sunlight on your face |
| Projector | We have Several 5 or 6 Projectors available
for as little as $50.00 each
some need replacement |
| Follow up question. | The VGA controller board is attached to the LCD panel by a ribbon wire and to the power supply board |
| IBM G40 Monitor - Not working, - SERVICE MANUAL | [EMAIL me also at: [email protected] , I MAY not visit here again ;-< ]
My IBM G40 15 |
| Looked at the blue ceramic caps -- only saw two small ones; but, they look ok. Will need to get und |
| Philips DTR 1500 | Does anyone know who to fix a philips DTR 1500 Digital Terrestrial Receiver.
You switch it on and |
| My Camcorder --Samsund SDC 903 | I have this Samsung camcorder model# SCD 903. That will not turn on. I plug in the charger to charge |
|
|
| [b]Tv not responding[/b] | i have a 14 year old Mitsibishi rear projrction 50 inch tv.
i changed the bulbs around 3 years ago. |
| USE LEDS with 30v you can serialize up to 10,12 LEDS and that will give you more light then 3 12 vol |
| BLT = backlight
_ = active ("On") when signal is "low"
If you don't check bu |
| Hitachi 50" projection TV - Fix, Trash or sell parts? | I have a Hitachi 50" projection TV model 50UX58B. I purchased it Jan 1999, so I would assume it woul |
| Standby light but no picture, what about the sound?
Normally Panasonic TVs gives an error code by |
| RCA hd56w58 | have an RCA hd56w58 I turned it on and the power light is on but I have no picture or sound. Now I c |
| the only advice i can give is to check that all the connectors are firmly pushed in check the fuses |
| If you've ever taken remote controls apart, you know that many employ "hooks" that can gen |
| The POWER rating of a transformer of a given physical configuration is reasonably related to its cor |
| My next troubleshooting step would be to plug in a set of known-good lamps (take out of a busted TFT |