| Subject | Text |
| AKIA(CFTD2083T) NEED SCHEMATIC | MY UNIT WILL NOT POWER UP. CHECKED MAIN FUSE (OK) ANY IDEA HOW TO FIX OR FIND PAPER ON THIS UNIT. I |
| Ferguson VideoStar,Service Manual or Schematic - FV 92 LV | Completely dead unit.Need to confirm psu power out pin connections to main board .psu supply fuse in |
|
|
| Hi, HeVi !! - Re: HP Laserjet 4L can you clarify ? | Hi, HeVi,
Many thanks for the advice but could you please clarify...
I'm sorry but I'm a bit thi |
| Ipod nano pcb connector | Hi,
Can anyone tell me what type of pcb connector is used in an iPod Nano to connect the display |
| need schematic for samsung Pwr BD | I'm in the process of troubleshooting a Samsung TV Model LN46a500t1f. The main power bd do not stay |
| Re: 106 Radio Code Help Please | [quote:eb6f207cde="compact57"]After a radio code for a 106 please. CL0401Y0213031
THANKS[/quote:e |
| My money's on cold soilder joint in the vertical circuit as well. Here is what I would advise. Trac |
| Philips MC165 Mini audio system | Could someone give me the reference (because unreadable) of the AN xxx4 integrated circuit power amp |
| Repalce the caps on the pip board or pull the pip brd out and jumper pins 5 to 11 and 7 to 9. |
| Projection TV turns itself off | I have a weird projection TV problem. This is a 55-in Pioneer, which turns off by itself. This start |
| SP42W5HFX ( J52A ) | Hello I´m from Madeira Island Portugal and I have a samsung
projection tv SP42W5HHFX chassi ( |
| Check the fuse's on the sustain brd. Unplug the connector if the Vsc doesn't come back up yes a bad |
| Unless you have some experience with mixing boards, that is not something to tackle. You'd at least |
| Re: Varying degree of electronic knowledge | [quote:94cba6414f="Donny"]Although you do have a point mainly for safety reasons...[/quote:94cba6414 |
| Re: Code peugeot expert | [quote:7e8e994b4c="kossu1"]PU-2294A
CL04013090915C
Tanks....😃[/quote:7e8e994b4c]
Your r |
| Circuit diagram for Panasonic SC-HT900 | Hi,
Can anyone give me the location where I can find the cuircuit diagram of Panasonic SC-HT900 s |
| forget it, they are board level repair or mech complete.
need to align with sharp service remote af |
|
|
| Channel out on old Technics | This old Technics (Panasonic SA-5170) has been running forever. Yesterday it lost power. It was the |