| Subject | Text |
| E/W fault. | Most of modern sets store the geometry settings in a memory IC (EEPROM). In your case it is almost 1 |
| First of all it's a 27". (If were a 32" it would be "32GT613")
Tuner shield & |
|
|
| Re: thomson tx92f | hello
change eeprom,this model have any problems :good look |
| akai ct-t21n32s fault wont startup from standby | cure: replace eeprom IC602 ref
Peter |
| Re: CODE FOR CLARION PN9886D | [quote:224481185e="javier1963"]Hello, im a radio collector and today i buyed a radio in salvage yard |
| Tv. Philips 27PS55 S121 Chssis 27M800 7603 WHITOUT AUDIO | :shock: :roll:
Philips 27PS55 S121
Chassis 27M800 7603
JUNGLA- MICRO TDA 9587H/N1/3/04 |
| Please Help Daewoo 710B monitor | I need bin for Eeprom 24c08 Daewoo 710B
please help me!
T |
| manual for bios chipse Dell Latitude | I wont a manual dell latitude, for lacaled eeprom memory.
Help me |
| some tips | Hi did you check menu settings of your tv? ok try press3x channel if does not off... if not, check y |
| Daewoo 20C4T | I need EEPROM files for DAEWOO 20C4T.
Thanks |
| Re: Peugeot 206 radio code | [quote:005aca1363="Sygirl"]Hi I have a Peugeot 206 cd player and need the code please.
Model: PU-23 |
| ok, so since you know how to get into service mode and convergence alignment...
my question is, can |
| philips tv | the fault on your philips tv is probably ic7064. also known as the painter ic, on the small signal b |
| Universum FT4210 | Hi!
Please help me! I need eeprom(dump) for this tv. TV type: Universum FT4210, Chassis: Gorenje/Ev |
| 24c08 | ciao a tutti non scrivo mai nel forum ma mi dedico solo alla sua lettura per imparare da altre perso |
| Hello,
maybe you have the battery teminal o DC connector fault.
Also you can have the eeprom date |
| Sony SLV-SE820G VCR | UK Model - Fault no front display and wrong functions on front buttons - I have replaced C701 and re |
|
|
| 24c04 without computer | I wonder is it possible to write EEPROM without programmer. I mean without hardware, connected to co |
| eprom dump supra stv28p10 | tv name: supra
tv model: ST28p10
Chassis name: 11ak19p5 (printed on right side of board) on back |
| SHARP | HI MARIO
IVE GOT THE SAME NAME MYSELF,FIRST OF ALL WITH OLDER SHARP TV YOU WILL HAVE |
| [quote:084c715fa0="minnie"]Contact the manufacture for firm ware/driver upgrade.[/quote:084c715fa0]
|
| :lol: change the eeprom it is a common fault |
| Chassis PT92 | Dead EEPROM 24C16W6. :(
Need the .bin file for it.
MCU: TDA9351 PS/N2/2I1185C. |
| Re: Code peugeot expert | [quote:7e8e994b4c="kossu1"]PU-2294A
CL04013090915C
Tanks....😃[/quote:7e8e994b4c]
Your r |
| Re: Vestel 11AK45 programming | [quote:718ecfd048="jeffsm7"]How do I enter the programming mode in the 11AK45 chassis? I have a fram |
| what kind of cpu | what kind of cpu and what eeprom? |
| Many thanks for your help. Managed to obtain a picture after resetting height, but geometry for all |