Subject | Text |
| Here's the parts that I used:
[url=R509 100K Ohm 1W resistor[/url] - got an set on Amazon. I prob |
| yeah! tv still working but, always need to push the reset button in front. otherwise no signal with |
|
repairing an old sansui amplifier | hello every one ,
new member here and also newby in the electronic repair
i have an old sansui |
| Humor me. "Float" one pin on each of the 6 front panel switches as a test. If the channel/ |
please help me out. | hi sir /mad
i really have a problem,and it about my panasonic CD stereo system,the model number is |
how to boot-up from cd in sony PCG-K76P | I have some error in my registry and I need to repair my operating system. I want my laptop to boot- |
Dead Black Diamond BD28WS | Hello to everyone this is my first post here. I have a BD28WS Black Diamond TV. The fault is when I |
Looking for Pioneer VSX-D307 Receiver Service Manual | I'm looking for a service manual (or at least a schematic) for my Pioneer VSX-D307 Receiver.
Anyo |
voltage for relay | hi,i have a problem on my yamaha rx-v392 model...i need to know what is the voltage of the relay in |
PHILLIPS TV TROUBLE | HELLO, Boy this guy just wants to sell sets!! Well PHILLIPS is probobly the worst piece of junk ever |
SC-HT900 | Hello.
I wonder if anybody could help me locate schematics for the above unit and its associated |
Re: Onkyo TX-SV535 Amp / Remote Speakers NOT Working | [quote:586d3411be="kayecross"]I can not get the remote speaker button to work on my amp. I have inst |
| Hi again,
By bypassing the main speaker relay everything works great. Does anyone know if this mi |
avr 130 one of the surround outputs is very very low | got a harman kardon avr 130 one of the surround outputs is very very low
when i connected speaker t |
| I face much of the same troubles here in the USA. I wont accept in any television under a 25' (with |
| Model number would help :?: but American system is NTSC. Perhaps you meant to say "changed from NTS |
Check here... | Check this link:
http://service.us.panasonic.com/operman/findmanual.aspx?model=SCAK27
The key |
|
| Protect mode occurs when an overcurrent situation is detected by the power supply in the amplifier. |
Headphone circuit for TV needed. | Hello all. I hope this is the right place for my question. Ok, I have a infrared wireless headphon |
ı need service manuel sony hmk-77b | ı need schematics or service manuel for sony hmk-77b stereo system
Please send to mail adress |
Code Lanc for Sony DCR-PC330E | I research the new code LANC for my sony DCR-PC330E, with the 3 modes: CAM, Recorder, and Photo.
I |
| Blowing speaker protection fuse suggests failure of the power amplifier output transistors. If a DVM |
| Hi,
Few things u can check:
1. Does the set power up?
2. Speakers - are they connected prop |
Siemens Gigaset 4010 Comfort problem | Can make call but can't disconnect (end it.) If I call someone and try to end call only sound is tur |
Beko Model 284248WNS Chassis 14.2 Colour problem | Ok, just to let you know that instead of manually degaussing I ran the TV through a process of turni |
thomson 32sw23u icc17chassis with new transformerkit install | hi all have been following some posts on this model and have replaced a blown fbt with the kit from |
| I agree with Miguel. if your mixer has PAN controls just turn all of them to the same end so your ch |
AKAI AM-A2 (help) | Hey. I Picked up an ''AKAI AM-A2 model Stereo Integrated Amplifier'' the other day. An electrician s |
Combining mixer outputs | I have been running a mixer for live bands & karaoke for years combining the left & right ou |
| Heh, true, that would come in handy. Here's the schematic of the affected area. I can post a more fu |