| Subject | Text |
| [quote:94b4285df1="gary"]IF THE LINES ARE VERTICAL IE TOP TO BOTTOM THEN VERT STAGE IS OK AND FAULT |
| service manual bpl sanyo TV NQR53QD2 | Since the picture is coming dark,no Y-Singal,If possible pls send me the detal of BPLSANYO TV Model |
|
|
| SONT TV PAL I / PAL B/G Conversion?? | I've just brought my SONY TV (KV28DS60U) to Oz from the UK. I knew it wouldn't work and had planned |
| Question on horizontal deflection | Larry,
maybe you can also help me on this one ....
I notice that the width of my TV picture has be |
| A CRT (picture tube) have 3 electron guns,each with their own filament, (heater) so you should see a |
| Varistor marks, and Panasonic E110 | Hello,
I am new in forum and also in electronics but I have a little knowledge from my education. N |
| Please help : My Panasonic television isn't well at all! | About 3 weeks ago, my Panasonic TV started to switch to standby mode quite regularly and, during the |
| convergence estimate | Hi, what`s he doing for $449.00? If he`s just changing the STK`s
Then I would say you are getting |
| Blackline FX | Hello,
Many TV sets now have these screens : it is simple, you deal with a high quality picture t |
| There are two causes for this failure:
1) Faulty tube, but most of the times two colors won't dis |
| samsung 19" goes black | Hi my samsung 19" tv (probly 5 years old) has recently been going to all black except a narrow strip |
| BLURRED SCREEN and shinking inward horizontal screen | can anybody suggest to where the problem lies,
I heard a bad flyback or a weak vaccum tube causes t |
| thanks for the reply ill pop the back off of it again and give it look ..i did see a heatsinked to-2 |
| Schneider Scinema 3210 NVM Codes | Can anyone advise what are the default Schneider Scinema 3210 NVM Codes.
Service mode displays:
|
| Need help maybe you can | My SONY big screen made in 1990, problem decription is as follows:
1. Static comes and goes sometim |
| csl2097dv service manual needed (samsung) | Does anyone have a schematic for the Samsung CSL2097DV 20" TV/DVD Combo?
The set Powers on, tun |
| Philips 29PT6231 Dead with stdby light blinking | Initially, Philips 29PT6231 set completely dead. No picture, no stdby light, no sound except for tic |
|
|
| Re: Electronics parts for TV VCR AUDIO closing down | I would be interested in all of your CD mech's and parts. Test cd's also. Please let me know what yo |
| Re: Audio but no Video on Philips projection tv model 8p4834 | [quote:bb4b048c59="thetechman007"]Hey There, I will try to give you a hand, If There is no filament |
| Re: TV Problem | [quote:ca5516462e="bigboy"]:D
I have a 32" Sony projection TV. Latley when I turn it on I am get |
| Re: problem with tv sony KV-C2981D - ERROR CODES | [quote:47d7ac3dc7="riki"]When tv is started for very first time in a day,there is no sound and pictu |
| re; Mitsubishi | Hi, try inputting a dvd signal into "video input 1" then if you get a picture
it probably is a tun |
| [b]SONY TV MDL# KV-27HFR Trinitron - No Picture after 45 Sec | [b:3b1fed15b4]Dear Admin,[/b:3b1fed15b4]
A bundle of thanks for such a wonderful Forum, I appreci |
| my Bush tv don't display anything on the tube | hi
my Bush Tv powers on to stand by, and when you want it to light up the tube it can't, but u wi |
| BUSH CTV(Model WS6671SIL)AK19 | The picture size is reduced to almost 14in from 28 in screen.Sound, color etc are working.Any ideas |
| @Larry | Larry, thanks for the remark. I will check the connections of the ON4409 (horizontal output driver) |
| Won't Start - 3 clicks and out? | I have a 32" ProScan that started doing the same thing. When I click the ON button it sounds as if |
| Vector Reserch | That's a lot of help Ray and Thanks for the help.I'll probably just proceed with the repairs as if t |
| Blue vertical line, no picture | It happened when I had replaced LNBF and went back to check if the signal came back, led/LCD tv disp |
| resolder all joints in the line output stage, check R629 (27ohms, 1/2w 90 degree tube)(2.7ohms, 1/2w |