| File | Date | Descr | Size | Popular | Mfg | Model |
| RGLNA01(0.7-3.0 GHz GaAs pHEMT).pdf : Full Text Matches - Check >> |
| Found in: file name (1) |
| RGLNA01(0.7-3.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA01 is 0.7 to 3.0 GHz high efficiency
GaAs Enhancement mode pHEMT Low Noise
Amplifier IP Block .The device is designed for use in
the IEEE 802.11b/g, PCS, PHS and Cellular system.
The die area of RGLNA01 is 0.8 mm x 0.7 mm, with
on chip input | 65 kB | 134 | Rficsolutions.Inc | RGLNA01 |
|
|
| Found in: fulltext index (99) |
| RGLNA11(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA11 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The device is designed for use in the 802.11a/b/g
and WLAN MIMO system.
The LNA covers a wide range of frequency from 2 to
6 GHz. The noise figure is 1.7 dB a | 126 kB | 55 | Rficsolutions.Inc | RGLNA11 |
| RGLNA10(7.0-26.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA10 is 7.0-26.0 GHz; Low Noise
Distributed Amplifiers using GaAs pHEMT
Technology. The self-biased amplifier provides 19
dB of gain and 14 dBm of output power at P1 dB
gain compression while requiring only 86 mA from a
single 3.0 V supply.
G | 44 kB | 198 | Rficsolutions.Inc | RGLNA10 |
| RGLNA06(2-6 GHz,3.3 V GaAs pHEMT).pdf | 13/02/08 | The RGLNA06 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The MMIC Low Noise Amplifier doesn’t require any
off-chip component. The Broadband LNA is
designed for the 802.11a/b/g/n system.
The LNA covers a wide range o | 54 kB | 78 | Rficsolutions.Inc | RGLNA06 |
| RGDA01(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGDA01 is 2.0 to 6.0 GHz GaAs Enhancement
mode psuedomorphic high electron mobility
transistor Driver Amplifier. The device is designed
for IEEE 802.11a/b/g, WLAN standards and Cellular
system.
The driver amplifier can provide upto 20 dBm power
| 74 kB | 122 | Rficsolutions.Inc | RGDA01 |
| RGLNA09(5.15-5.35 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGLNA09 is 5.15 to 5.35 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier .The
device is designed for 802.11a and WLAN MIMO
system.
The noise figure is 1.4 dB at 5.25 GHz. The
RGLNA09 i | 36 kB | 61 | Rficsolutions.Inc | RGLNA09 |
| RGLNA03(2-12 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA03 is 2.0 to 12.0 GHz high efficiency GaAs Enhancement mode p-HEMT Low noise amplifier .The device is designed for 802.11a/b/g standard.
The minimum noise figure achieved is 1.5 dB at 2 GHz. A single 3.5V and 12 mA current bias the LNA. No input | 114 kB | 92 | Rficsolutions.Inc | RGLNA03 |
|
|
| RGLNA08(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA08 is 2.4 to 2.5 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11b/g and WLAN MIMO
system.
The noise figure is 1.5 dB at 2.4 GHz and die area
is | 77 kB | 64 | Rficsolutions.Inc | RGLNA08 |
| RGPA03(3.4-3.6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGPA03 is a 3.4 to 3.6 GHz high efficiency GaAs Enhancement mode psuedomorphic high electron mobility transistor MMIC Power Amplifier. It has been designed for use in the 3.5 GHz WiMax systems.
The part is matched at the input and output so no additi | 154 kB | 109 | Rficsolutions.Inc | RGPA03 |
| RGPA01(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGPA01 is a 2.4 to 2.5 GHz high efficiency
GaAs Enhancement Mode pHEMT MMIC power
amplifier. This MMIC power amplifier doesn’t require
any off chip components.
The device is designed for 802.11b/g and WLAN
MIMO system. The Power Amplifier exhibit | 69 kB | 137 | Rficsolutions.Inc | RGPA01 |
| RGLNA02(2-6 GHz, 3V GaAs pHEMT).pdf | 13/02/08 | The RGLNA02 is 2.0 to 6.0 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11a/b/g and Wi-Fi
systems. It gives Power Output of 5 dBm at P1 dB.
The minimum no | 59 kB | 65 | Rficsolutions.Inc | RGLNA02 |
| RGPA04(4.9-5.9 GHz GaAs pHEMT).pdf | 13/02/08 | The RGPA04 is a 4.9 to 5.9 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor MMIC power amplifier.
The device is designed for 802.11a WLAN system.
The part is matched at the input and output so no
additional RF | 104 kB | 99 | Rficsolutions.Inc | RGPA04 |
| RGPA05(1.85-1.91 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGPA05 is a 1.85 to 1.91 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor MMIC power stage. This
power stage can be preceded by a Driver stage to
realize a complete amplifier.
It has been designed speciall | 118 kB | 126 | Rficsolutions.Inc | RGPA05 |
| GRFM1.pdf | 11/02/08 | The GRFM1 is 10 GHz to 20 GHz Frequency
multiplier designed on 2 um InGaP HBT process.
GRFM1 multiplies the input frequency from 10 GHz
to 20 GHz by the factor of 2 so as to produce the
output of 20 GHz to 40 GHz. Conversion gain of
frequency multipl | 41 kB | 133 | Rficsolutions Inc. | GRFM1 |
|
|
| GRVO2.pdf | 11/02/08 | The GRV02 is 10 to 15 GHz; broadband VCO
designed on 2 um GaAs HBT Technology. The
resonator part is split on-chip inductor and off-chip
Varactor. The VCO consumes only 3.5 mA current
and the layout is very tiny.
The phase noise of the GEV03 can be i | 64 kB | 97 | Rficsolutions Inc. | GRV02 |
| GEVO3.pdf | 11/02/08 | The GEV03 is 15 to 20 GHz broadband VCO
designed on 2 um GaAs HBT process. The device is
designed for high frequency applications. The
resonator part is split into on-chip inductor and offchip
varactor. The GEV03 consumes only 3.5 mA
current.
The ph | 44 kB | 67 | Rficsolutions Inc. | GEV03 |
| GEDA01.pdf | 11/02/08 | The GEDA01 is 7.0 GHz to 20.0 GHz low power
single stage buffer amplifier. The amplifier is
designed using 2 μm InGaP HBT Technology for
high frequency applications.
Driver amplifier shows gain of 4.5 dB at 20 GHz with
power output of 9 dBm. It | 48 kB | 517 | Rficsolutions Inc. | The GEDA01 is 7.0 GHz to 20.0 GHz low power |
| GEDA02.pdf | 11/02/08 | The GEDA02 is 20 GHz to 40 GHz low power buffer
amplifier. The amplifier is designed using 2 μm
InGaP HBT process for high frequency applications.
Driver amplifier shows gain of 1dB at 40 GHz with
power output of 0dBm. It operates at 4.2Volts. | 44 kB | 276 | Rficsolutions Inc. | The GEDA02 is 20 GHz to 40 GHz low power buffer |
| GHZ.pdf | 25/06/20 | . Electronic Components Datasheets Passive components capacitors CDD G Gemcon 2006 Radial GHZ.pdf | 170 kB | 0 | Radial | GHZ |
| GRDA1.pdf | 11/02/08 | The GRDA1 is 10 GHz to 20 GHz differential
amplifier designed on 2 um InGaP HBT process.
The gain of GRDA1 is 5 dB typically with flatness of
±3dB over the entire bandwidth. Typical current
requirement for GRDA1 is 24 mA.
The one dB compression point | 46 kB | 75 | Rficsolutions Inc. | GRDA1 |