Text preview for : DVD615_616K_Latam_upgrade.pdf part of Philips DVD615 616K Latam upgrade Philips Symptom Cure 2006 References DVD615_616K_Latam_upgrade.pdf
Back to : DVD615_616K_Latam_upgrade | Home
A. Preparation to upgrade firmware:
1. Unzip the zip-archive attached to this Symptom/Cure
2. Start the CD Burning software and create a new CD project (data disc) with the following settings:
File system: ISO9660
Format: MODE 1: CDROM
Recording mode: SINGLE SESSION (TRACK-AT-ONCE), FINALIZED CD
3. Place the content of the zip-archive (2 files) into the root directory of the new CD project.
4. Burn the data onto a blank CDR
Note: ISO9660 is mandatory, UDF discs are not supported !
The final CDROM must not contain any other data except the file from the zip-archive.
B. Procedure to apply the firmware upgrade:
1. Power up the set and open tray.
2. Insert the prepared Upgrade CDROM and close the tray.
3. The set will read the disc after which the tray will open
4. Remove the disc from the tray
Note: Do not press any buttons or interrupt the mains supply during the upgrading process,
otherwise the set may become defective.
5. The whole upgrade process takes less than 5 minutes.
6. When the upgrade process is completed the tray will closed automatically.
7. Unplug & replug the mains cable