Crack_solution.txt part of tachosoft17.zip, Thachosoft dash calibration text manual preview

Text preview for : Crack_solution.txt part of Thachosoft dash calibration

Back to : tachosoft17.zip | Home

You need winhex registered

Install winhex,copy the crack files into the directory where winhex is installed
and start the CR-WH160.EXE, winhex is now registered.

1. start Tachosoft 1.7 do not enter anything.

2. now start winhex and open tachosoft 1.7
in winhex go to tools/ram editor, you will see 2
process with same name Tachosoft 1.7, select second Tachosoft 1.7 (the one below) and click on
process/Entire memory.

3. go to search/replace hex value

4. search for : your fingerprint created on your PC but reversed.
(if you have displayed "AB12CD34 then search for "34CD12AB" replace it with " AA857ACE " , it
will be fond and replaced 3-5 times, replace all.

switch to Tachosoft 1.7

Enter the below user name and Serial number
NAME: Kasim
SN : JEQK75-8XKZ24-XT1JYY-80GD5K-AAF42X-9TCY4T-YRMR67-8MUD5Q

5. press ok, good luck.

Please don't distribute