Text preview for : p47-71.pdf part of Philips p47-71 Philips Monitor CD 2001 Monitor CD 2001 E-MANUALS Philips crt 104s PDF p47-71.pdf
Back to : p47-71.pdf | Home
GENERAL PRODUCT SPECIFICATION 104S CM23 GSIII 47
Go to cover page
CM2300 14" 54KHz AUTOSCAN COLOUR MONITOR
===========================================
FEATURES / BENEFITS
- EXTREMELY HIGH MTBF (OVER 50K HRS, EXCLUDING CRT)
- PROFESSIONAL LOOK, WITH NON-FLAMMABLE CABINET (94V-0)
- USER'S CONTROLS
. FRONT MOUNTED CONTROLS FOR EASY ACCESS
- BETTER DISPLAY PERFORMANCE
. FINER CRT DOT PITCH (0.28 MM)
. FULL SCREEN SIZE APPLICATION
. REAL MULTI -FREQ.
- POWER SAVING MANAGEMENT SYSTEM
- MAXIMIZED CONTAINER LOADING
- VESA DDC1 AND 2B
- LOW EMISSION MPR II
14" CM2300 GS-III CMTR
TYPE : 104S11/89 (COCA) 8639 000 10477
00-02-18 BRAND : PHILIPS (54K)
Wiliam Ou 25 590 1
00-02-18
Back Forward
48 104S CM23 GSIII GENERAL PRODUCT SPECIFICATION
Go to cover page
INDEX
=========
1.0 Introduction
2.0 General description
2.1 General condition
3.0 Electrical characteristics
3.1 Signal interface
3.1.1 Input requirements
3.1.2 Signals input
3.1.3 Factory preset modes
3.2 Timing requirements
3.2.1 Horizontal scanning
3.2.2 Vertical scanning
3.3 Power supply
3.4 Power saving management system
3.5 CRT description
3.6 RGB amplifier
3.6.1 Video amplifier
3.6.2 Brightness and Contrast
3.7 Variation of image size
3.8 Degaussing
3.9 Phosphor protection
3.10 Low emission requirements (MPR-II )
3.11 Display data channel : DDC1/2B (VESA STANDARD)
4.0 Display
4.1 Display resolution
4.2 Image size
4.3 Image centering deviation
4.4 Picture shift control range
4.5 Picture tilt
4.6 Geometrical distortion
4.7 Image non-linearity
4.8 Mis-covergence
4.9 Focus check
4.10 Luminance uniformity
4.11 White color adjustment
4.12 Color tracking on full white pattern
4.13 Purity
4.14 Moire'e
4.15 Blemish
14" CM2300 GS-III CMTR
TYPE : 104S11/89 (COCA) 8639 000 10477
00-02-18 BRAND : PHILIPS (54K)
Wiliam Ou 25 590 2
00-02-18
Back Forward
GENERAL PRODUCT SPECIFICATION 104S CM23 GSIII 49
Go to cover page
5.0 Mechanical characteristics
5.1 User controls ( at front)
5.2 Connector and cables
5.2.1 Power Cord
5.2.2 Signal Cable
5.3 Tilt and swivel base
6.0 Environmental characteristics
6.1 Susceptibility of display to external environment
6.1.1 Operation limits
6.1.2 Transportation packages
6.2 Display disturbance from external environment
6.2.1 ESD disturbances
6.3 Display disturbance to external environment
6.3.1 Ionizetic radiation
6.3.2 EMI
7.0 Safety tests
7.1 Dielectric strength
7.2 Resistance for protective earthing
7.3 Leakage current
7.4 Grounding
8.0 Certifications
8.1 Safety
8.2 EMI
8.3 Fulfil approbation requirements
9.0 Reliability
9.1 Mean time between failures
10.0 Quality assurance requirements
10.1 Acceptance test
11.0 Service ability
14" CM2300 GS-III CMTR
TYPE : 104S11/89 (COCA) 8639 000 10477
00-02-18 BRAND : PHILIPS (54K)
Wiliam Ou 25 590 3
00-02-18
Back Forward
50 104S CM23 GSIII GENERAL PRODUCT SPECIFICATION
Go to cover page
1.0 Introduction
This document is related to the 14" AUTOSCAN (VGA above and Max.
resolution 1024X768 by 60HZ refresh) color monitor for world-wide destination.
2.0 General description
The AUTOSCAN analog color monitor is specified as a display peripheral within
an IBM PC, PS/2 ,VGA and advance VGA compatible system.
The AUTOSCAN analog color monitor is to operate at horizontal line rates
between 30 to 54 KHz and refreshment rate between 50 to 120 Hz, can be applied to all
RGB analog computers within this scanning frequencies.
The AUTOSCAN analog color monitor is intended to be a finished product,
basically a display device mounted inside a plastic enclosure which provides the aesthetic
mechanical, ergonomic and safety requirements.
2.1 General condition
The unit will produce a usable image after switching-on,
measurements are to be carried out with a full stabilized
set after 30 minutes warm-up at room temperature of 25