Text preview for : SB-2MF-0003-B409.pdf part of Kyocera SB-2MF-0003-B409 Kyocera Printer FS-3040P_3140P SERVICEBULLETIN SB-2MF-0003-B409.pdf
Back to : SB-2MF-0003-B409.pdf | Home
(Page.1/2)
Service Bulletin Ref. No. 2MF-0003 (B409)
November 22, 2011
Firmware Upgrade (Engine: Ver. 005.002)
Subject
FS-3040MFP+_FS-3140MFP+_v.3.00.0020_(2011-08-19)
Model FS-3040MFP+, FS-3140MFP+
Topic
The firmware was upgraded as follows.
Content of Changes
No. Item Details CTL FW
1 Measures against the The toner low detection was changed according to the residual amount 575682 ENGINE
erroneous display of since "Toner low" might be displayed right after toner container was
"Toner low" message installed.
(Indication of "Toner low" message is based on the count where the toner
low is regularly detected. However, if the amount of residual toner inside
the toner container is high, the count to show this message will be
increased in order to stabilize the toner low detection.)
2 Change of the SC5100 The SC5100 error detection was changed to the same manner of the 571970 ENGINE
error detection conventional models.
The message "Replace toner" may appear if toner inside the developer unit is clustered on one side because of
move of the machine or due to detachment/attachment of the developer unit for jam clearance even after the
engine firmware was upgraded. In this case, however, the message can be cleared by closing the top cover after
once opening it or turning the power OFF and ON.
Program No. Check Ver. Status Current Remark
SUM Date Ver.
ENGINE 2LW_1000005002 A1EC 005.002 2011/10/19 004.001 New
upgrade
MAIN 2MF_2F00003009 003.009 - 003.008 FS-3040MFP+
MAIN 2MG_2F00003009 003.009 003.008 FS-3140MFP+
SCANER 2LW_1200002001 - 002.001 2011/6/10 -
Optional language KR 2LW_81KR001015 - 001.015 - - For KMKR
Optional language TW 2LW_81TW001013 - 001.013 - - For KMTW
Optional language BR 2LW_81BR001015 - 001.015 - - For KMBR
Optional language CN 2LW_81CN001012 - 001.012 - - For KTST
FAX BOOT/APL 2H9_5500008001 - 008.001 - - Except KTST
FAX BOOT/APL 2H9_5700N05001 - N05.001 - - For KTST
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
(Page.2/2)
Service Bulletin Ref. No. 2MF-0003 (B409)
November 22, 2011
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the problem described above arises.
Also, please explain your users the contents of above.
Serial Nos. of the Affected Machines:
Engine: From available timing in the November 2011* production
*The above is the plan at the present moment. Please note that this information is subject to change.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)