Text preview for : 2LV-007.pdf part of Kyocera 2LV-007 Kyocera Printer FS-2100-4100-4200-4300 ServiceBulletin 2LV-007.pdf
Back to : 2LV-007.pdf | Home
Service Bulletin Page 1/1
C288 / SB 2LV-007
SB Number: SB 2LV-007 Creation Date: 14/06/2013
Subject: Firmware upgrade (Main v004.008)
Model: FS-2100D/2100DN/4100DN/4200DN/4300DN
Contents of changes
1 Phenomenon
Error code F245/F24B/F000 may occur.
Cause
During communication error recovery, the message "Error occurs"may be displayed.
2 System error F245 may appear, during synchronization (PCLe Link-up) between two IC's.
3 XPS file format is now supported.
4 To comply with the BAM regulation, the engine recovery control when receiving data from the Network print
protocol port has been changed.
5 Full page print mode is now supported.
6 The message "Replace MK " may appear after 200K print-outs.
7 The machine may be locked, when printing macro data from certain host systems.
8 Horizontal lines may partially appear in shaded images with screens in the illustration, when printing from
Illustrator on Macintosh computers.
9 Only the from may be printed (Without data), when using form overlay.
10 Macro data may be printed as text, when printing from applications after executing PCL macro saved on
CF cards.
11 Certain single sheet prints may be printed on multiple pages.
12 System error F245 may appear, when receiving certain E-mails.
13 Line feed position may shift to multiple pages, when sending certain data after setting FRPO P3 to "2".
14 PCL macro data may not be saved to the HDD, when registering continuously.
15 Text may drop out when printing certain XPS data.
16 The print out may appear abnormal, when printing certain PCL data.
Firmware
Type Program No. Check SUM Version Status date Applicable model(s)
MAIN 2L2_3F00004008 ---- 004.008 19/10/2012 FS-2100D New upgrade
MAIN 2LV_3F00004008 ---- 004.008 19/10/2012 FS-2100DN/4100DN/ New upgrade
4200DN/4300DN
ENGINE 2LV_1000001079 ---- 001.079 ---------- FS-2100D/2100DN/
4100DN/4200DN/4300DN
Classification Entire stock rework X In-field modification by case No modification necessary
In-field modification at next visit
Field measure To implement the changes mentioned in this service bulletin, please upgrade all the firmware to
the latest version at the same time.
KDIS Service Department, KYOCERA Document Solutions Europe B.V.