Text preview for : 98019.pdf part of Panasonic TX-29AD1E TX-29AD1E.part3
Back to : TX-29AD1E.part3.rar | Home
ORDER No:- ETD:- 98-019
Technical Information
Colour Television
Model:Chassis:Date:Subject:Background:Remedy:All series 1 Euro-2 models LD1* AD1* MD1* XD1* Euro-2 27-2-98
A2 stereo When fitting later version software into earlier production sets there may be a compatibility problem with the existing EAROM. Change of EAROM data (See Table below)
ADDRESS 203h 204h Method:1. 2.
ORIGINAL FFh FFh
NEW 00h 18h
1. 2. 1. 2. 3. 4.
Entry to Service Mode 1 Select programme position 60 Set the Bass to maximum position and the Treble to minimum position. Press the Reveal button on the remote control and at the same time press volume down button on the TV. Entry to Service Mode 2 Access the last function in Service Mode 1 ( blue adjustment of white section) by using the Green key on the remote control. Press the Hold button on the Remote Control. Access to EAROM Table Press the Status Key for access to EAROM table. Select the desired data address by Cross key and position UP/DOWN KEY. Change the data by the Volume UP/DOWN key. Press the STR. key to store .
To select page To select previous page. To increase data. ( Data plus ). To decrease data ( Data minus ).
Position Up/Down key. Volume Up/Down key.
To select address (Last low). To select address (Next byte). Cross key To select address (Next low). To select address (Last low).
Panasonic
Document No. QUA0011 Issue: 2