Text preview for : AE-6A.pdf part of SONY AE-6A Sony AE-6A SERVICE MODE



Back to : AE-6A.pdf | Home

SERVICE MANUAL
MODEL
COMMANDER DEST CHASSIS NO.

AE-6A CHASSIS
MODEL
COMMANDER DEST CHASSIS NO.

KV-29FQ76E

RM-938

ESP

SCC-Q81H-A

-1-

SECTION 4 CIRCUIT ADJUSTMENTS
4-1. Electrical Adjustments
Service adjustments to this model can be performed using the supplied remote Commander RM-938. Programming the Remote Commander for Operation in Service Mode 1. Press the VCR/TV/DVD button until the TV LED lights. Press and hold the yellow button for approx. 5 seconds until the TV LED flashes quickly. Press 99999. All three LED's should light. The remote commander is now set to Service Mode. To return the remote commander to normal operation mode repeat steps 1. and 2. then press 00000. All three LED's should light. The remote commander is now set to normal mode. Setting the TV into Service Mode 1. Program the remote commander for operation in Service Mode as described above. Turn on the TV main power switch. Press the video standby button on the remote commander twice. `TT ' will appear in the upper right corner of the screen. Other status information will also be displayed. Press `MENU' on the remote commander twice to obtain the following menu on the screen.
Service AE6A, Apr 10 2002, V59017 Initialising Reset Devices Monitoring Device Register Setting Special Adjustment.
BLACK GREEN RED = No Conformity = Compatible Model = Conformity for all data Model Setting KV-29FQ76 KV-29FQ76 KV-36FQ80 KV-36FS76
Reset

Initialising Menu

Initialising Model Setting Destination Setting Basic Setting Feature Setting Select : Next menu:

2.

Model Setting The menu contains a list with all the available models of this software to set up the TV set in an easy way. The selection of a model is setting data for its features and hardware resources which cannot be detected by the automatic power on H/W detection as well as a special model byte to get an unique model identification for models which cannot be differed by features and hardware resources (e.g. KV-29FQ76 and KV-32FQ80) Before data is set, the user will be asked if he really wants to set a new model. If the user agrees, automatically the destination setting menu is shown.

3.

4.

2. 3.

4.

Table.4-1 Indication of Model Compatibility.

Select :

Next Menu :
Black:

5. 6. 7.

Move to the corresponding adjustment item using the up or down arrow buttons on the Remote Commander. Press the right arrow button to enter into the required menu item. Press the `Menu' button on the Remote Commander to quit the Service Mode when all adjustments have been completed.

If any data does not match to specific model, the model name is displayed in black.
Green:

All data which is checked by model setting menu concurs to model except model byte.
Red:

Note : · After carrying out the service adjustments, to prevent the customer accessing the `Service Menu' switch the TV set OFF and then ON. · Certain menu items are only available in production mode.

All data which is checked by model setting menu concurs to model including model byte. Note: After selecting a model, it may be necessary to reset some devices to get the correct data. (Treble/Bass Offset of Sound, deflection adjustments, ...)

- 25 -