4_26.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_26.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

Error code
3122 3126 3133 7601

Contents of problem
Recording on DVD-RAM disc failed.

Troubleshooting

7890

7791 3105 E000 EC87 F100 F526 F571 F572 F573 F600 F700

F924 FB24 FB34

FB44

1) Set the power switch to "POWER OFF", reattach the battery or AC adapter/charger, and then set the power Writing data file to disc failed. switch to "VIDEO" or "PHOTO" (disc). Take care not to subject VDR-M70PP/M50PP to It takes much more time than impact or vibrations at this time. necessary to process start or end of 2) Set the power switch to "POWER OFF", remove the recording (timeout error). disc and check whether or not it is dirty, scratched or distorted. If it is dirty, clean it referring to the next page, and then reload it. If it is scratched or distorted, Recording on DVD-R disc failed. use another disc. Then set the power switch to "VIDEO" or "PHOTO" (disc). 3) Replace the disc without regard as to whether it is dirty, scratched or distorted. Formatting DVD-RAM disc failed. Format it again, or replace the disc. When recording photo, writing data to 1) Set the power switch to "POWER OFF", reattach the battery or AC adapter/charger, and then set the power disc failed. switch to "VIDEO" or "PHOTO" (disc). Writing data to disc failed. Take care not to subject VDR-M70PP/M50PP to Abnormal stop during reading or impact or vibrations at this time. writing of data from/to disc. 2) Set the power switch to "POWER OFF", remove the Buffer has overflowed during disc and check whether or not it is dirty, scratched or recording. distorted. If it is dirty, clean it, and then reload it. If it When starting recording, reading of is scratched or distorted, replace the disc. data file on disc failed. Then set the power switch to "VIDEO" or "PHOTO" When recording photo, writing data to (disc). disc failed. When recording video, writing data to 3) When using DVD-R disc: Replace the disc without regard as to whether it is disc failed. dirty, scratched or distorted. Backup error When using DVD-RAM disc: No response from disc drive even when Initialize the disc (deleting all data recorded on 3 minutes has elapsed (drive timeout disc), or replace the disc. error). Recording failed Initialization at start of recording failed. While recording mode was being transferred to recording pause, writing data to disc failed. During processing of buffer overflow error, writing data to disc failed.