Text preview for : 6_05.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

When the connections for creating reference data are complete, set the DVD video camera/recorder and test equipment as follows: 1) Make sure that no disc or card is inserted: Neither is necessary when creating reference data. 2) Set the power switch to "VIDEO" and quick mode switch to "OFF": After that operate the DVD video camera/recorder while watching the LCD monitor screen. 3) Press the MENU button to display the menu screen. 4) Use the joystick to choose "Initial Setup", and then press the center of joystick. 5) Use the joystick to choose "Reset", and then press the center of joystick: The screen for verifying reset will appear. 6) Use the joystick to choose "ENTER", and then press the center of joystick: Reset will be executed.
7) Press the MENU button to restore the normal display. Information: The following table shows the menu status after the above settings: The settings for Date Setup are not shown in the table below, since they do not have any meaning when creating reference data. Item
Program AE White Balance EIS Dig. Zoom Wind Cut Wide (M70PP only) VIDEO Mode Quality Input Source PHOTO Input Self Timer OSD Output

Setting
Auto Auto On ×40 Off Off FINE FINE CAMERA Field Off Off

Item LCD Setup
Brightness Color Level

Setting
+ +

Camera Functions Setup

Initial Setup
Beep Power Save Record LED Language On Off On English

Recording Functions Setup