Text preview for : LMY4AD-FR_E.pdf part of Yamaha PM1D digital mixing system



Back to : Yamaha-PM1D mixsystem.par | Home

AD CARD

LMY4-AD
SERVICE MANUAL

s CONTENT NOTICE OF CHANGES IN LMY4-AD S/M ............................... 3 SPECIFICATIONS .................................................................... 4 PANEL LAYOUT ........................................................................ 4 DIMENSIONS ........................................................................... 4 BLOCK DIAGRAM .................................................................... 5 LSI PIN DESCRIPTION ............................................................ 6 IC BLOCK DIAGRAM ................................................................ 8 CIRCUIT BOARD ...................................................................... 9 TEST PROGRAM ................................................................... 11 PARTS LIST CIRCUIT DIAGRAM

PA 011503

*.**K-** K

Printed in Japan '00.9

LMY4-AD

IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the appointed service representative. IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form. The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus). IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and /or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.

2

LMY4-AD

s NOTICE OF CHANGES IN LMY4-AD S/M
IC BLOCK DIAGRAM 1. Losic IC HD74LV244AFPEL (IS024400) is changed to Losic IC TC74VHC244F (XT800A00) 2. Losic IC HD74LV245AFPEL (IS024500) is changed to Losic IC 74VHC245SJX (XY874A00)

TEST PROGRAM Test program is newly provided. (Page 11)

3

LMY4-AD

s SPECIFICATIONS
Input Terminals CH1-4 Actual Load Impedance 10k ohm For Use With Nominal 600 ohm Lines Input Level Connector Nominal +10 dB (2.45 V)* Maximum. Before Clip +24 dB (12.3 V)* XLR-3-31 type(Balanced)**

* 0 dB is referenced to 0.775 Vrns. ** 1=GND, 2=HOT, 3=COLD

s PANEL LAYOUT

s DIMENSIONS

40 4.5 6 28 6 18 1

322.1 301.8 (1.3)

24 120

24.5

(4.5)

1

(23.5)

24

7

33

Unit: mm

4

100

111

24

LMY4-AD

s BLOCK DIAGRAM
AD2
IC301 15 1 2 1 3 31 29 17 16 18 3 4 2 I1 a/7 SYNCM b/15 256FS a/19

[CH1]
3

5 6

Amp 7 IC100

2 3

Amp 1 IC101

2 3

Amp 1 25

A/D
IC102 IC103 4 10 Amp 7

ADFC
IC300

24 33

1 Amp

2 3

6 5

Amp 7

6 5

[SIGNAL]

15

[CH2]

1

2

5 6

Amp 7 IC100

2 3

Amp 1 IC201

2 3

Amp 1 25 IC202

3

A/D
IC203 4 10

1 Amp

2 3

6 5

Amp 7

6 5

Amp 7

[SIGNAL]

IC301 15 1 3 Amp 1 25 IC402 6 5 Amp 7 4 29 31 15 5 I2 b/7 1 2

[CH3]

5 6

Amp 7 IC400

2 3

Amp 1 IC401

2 3

3

A/D
IC403 10

ADFC
IC600

24 33

1 Amp

2 3

6 5

Amp 7

[SIGNAL]

15

[CH4]

1

2

5 6

Amp 7 IC400

2 3

Amp 1 IC501

2 3

Amp 1 25

IC302

IC303 11-13 1-3 A9 a/32 A8 b/31 A10 b/32 D00 a/34 D01 b/34 D02 a/35 D03 b/35 D04 a/36 D05 b/36 D06 a/37 D07 b/37

3

A/D
IC502 IC503 10 Amp 7 4

1 Amp

2 3

6 5

Amp 7

6 5

/RES

6

Reg.

IC304 11-18 2-9

[SIGNAL]

KEC-92518

5

LMY4-AD

s LSI PIN DESCRIPTION
YAC509 (XM167A00) ADFC
PIN No. 1 2 3 4 5 6 7 NAME SI0 (L) SI1 (L) SI0 (R) SI1 (R) WCKI BCKI IMOD0 (*) I/O I I I I I/O I/O I FUNCTION Input to Lch LO gain side (IMOD0=1) Input to Lch (IMOD0=0) Input to Lch HI gain side (IMOD0=1) Input to Rch LO gain side (IMOD0=1) Input to Rch (IMOD0=0) Input to Rch HI gain side (IMOD0=1) Word clock input/output of serial input Bit clock input/output of serial input Setting of serial input modes. "1" = parallel, "0" = serial Setting of serial input modes. "1" = asynchronous, "0" = synchronous Setting of input data timing ( " )
ITM1 ITM0 Input timing (format) 0 Move forward 20 bits closer 0 1 16 bits B.B format 0 0 18 bits B.B format 1 1 20 bits B.B format 1

AD1: IC300, 600
PIN No. 23 24 25 26 27 28 29 NAME XO XI CK256A MCK BCKO WCKO SYNC I/O O I O O O O I/O FUNCTION Connect X'tal OUT crystal oscillator or input 256fs clock to XI. Connect X'tal IN crystal oscillator or input 256fs clock to XI. Output clock which is inputted to 256fs OUT XI. Output 128fs clock. Output 64fs bit clock which divides MCK (It rises at the head of SYNC). Output 1fs word clock which divides MCK and of which the duty ratio is 50%. Input/output of 1fs synchronous clock (The fall of SYNC makes the 6th rise of 256fs the head of WC.) Output in order of Rch data and Lch data. Output in order of Lch data and Rch data. Switching of input or output of SYNC. "1" = output, "0" = input.

8 9 10

IMOD1 (*) ITM0 (*) ITM1 (*)

I I I

30

SOR

O

31 SOL O 32 CKSEL (*) I

11 GSEL0 (*) 12 GSEL1 (*)

I I

Setting of a floating gain ( " )
GSEL1 GSEL0 Floating gain 0 0 12 dB (2 bits) 0 1 18 dB (3 bits) 1 0 24 dB (4 bits) 1 1 30 dB (5 bits)

33 RESET 34 MUTE (*)

I I

Internal reset at "0". Output "0" for output mute all at "0".

13 14 15 16 17

DFC (*) GCC (*) HTC (*) CFT0 (*) CFT1 (*)

I I I I I

Digital filter ON/OFF ("1"=ON, "0"=OFF) Automatic adjustment of floating gain ON/OFF ("1"=ON, "0"=OFF) Quasi instantaneous cross fade bold time ON/OFF ("1"=ON, "0"=OFF) Setting of cross fade time ( " )
CFT1 CFT0 Cross fade time 0 ms 0 0 53 ms 0 1 106 ms 1 0 212 ms 1 1

35 36 37 38 39

OMD (*) NSC (*) Test4 Test5 VDD

I I O O

SOL, SOR output (switching of "0"MBS First/"1" LSB First). Noise shooping ON/OFF. "1"=OFF, "0"=ON. Normally non-connected. " VDD(+5V)

18 19 20

GND VDD Test1 (*) I

GND VDD(+5V) Normally non-connected

40 GND 41 DLSP0 (*) 42 FLSW (*)

I I

21 22

Test2 (*) Test3

I O

" "

43 44

Test6 (*) Test7 (*)

I I

GND Floating delay switching. ("1"=16 sample delay, "0"=0 sample delay) Floating inhibiting SW. "1"= floating, "0"= floating is inhibited. ADC of output wave at HI level side. Normally non-connected. "

6

LMY4-AD

AK5392-VS-E2 (XV065A00) A/D CONVERTER
PIN No. 1 2 3 4 5 6 NAME VREFL GNDL VCOML AINL+ AINLZCAL I/O O O I I I FUNCTION L ch standard voltage output (+3.75V) L ch standard grand (0 V) L ch common voltage (+2.5 V) L ch analog +input L ch analog -input Zero calibration "L"=VCOML, VCOMR "H": Analog input (AINLI,AINRI) Power supply for digital Ground for digital Calibration status Reset Serial interface mode select Clock for L/R ch select Serial data clock PIN No. 15 16 17 18 19 20 NAME I/O

AD1: IC103, 203, 403, 503
FUNCTION Serial data output Frame synchronization clock Master clock input Master clock select HPF enable pin Test pin

SDATA O FSYNC I/O MCLK I CMODE I HPFE I TEST I

7 VD 8 DGND 9 CAL O 10 RST I 11 SMODE2 I 12 SMODE1 I 13 LSCK I/O 14 SCLK I/O

21 22 23 24 25 26 27 28

B GND A GND VA AINRAINR+ VCOMR GNDR VREFR

I I O O

Ground (0 V) Ground for analog (0 V) Power source for analog (5V) Rch analog -input Rch analog +input R ch common voltage (2.5 V) R ch standard glound (0 V) R ch standard voltage output (3.75 V)

7

LMY4-AD

s IC BLOCK DIAGRAM
NJM2068MD-T1 (XJ553A00) Dual Operatinal Amplifier
AD: IC100-102, 201, 202,400-402, 501, 502,700, 750, 800, 850

HD74LV08AFPEL (IS000800) Qual 2 Input AND
AD: IC306

SN74LV138ANSR (IS013810) DECODER
AD: IC303
A B C 1 2 3 4 5 6 7 8 B C G2A G2B G1 A 16 Y0 Y1 Y2 Y3 Y4 15 14 13 12 11 10 9 Vcc Y0 Y1 Y2 Y3 Y4 Y5 Y6

Select Output A Inverting Input A Non-Inverting Input A -DC Voltage Supply 1 2 3 4 -V +V 8 7 6 5 +DC Voltage Supply Output B Inverting Input B Non-Inverting Input B 1A 1B 1Y 1 2 3 14 13 12 Vcc 4B

-

+ + -

G2A 4A Enable 2A 2B 2Y GND 4 5 6 7 VSS 11 10 9 8 4Y 3B 3A 3Y G2B G1 Output Y7 GND

Output

Y7 Y6 Y5

ENABLEINPUTS SELECTINPUTS G1 G2A G2B C B A X H X X X X X X H X X X L X X X X X H L L L L L H L L L L H H L L L H L H L L H H L H L H L L L H L H L H L H L H H L L H L H H H L

Y0 H H H L H H H H H H H

Y1 H H H H L H H H H H H

OUTPUTS Y2 Y3 Y4 Y5 Y6 Y7 H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H L H H H H H H L H H H H H H L H H H H H H L H H H H H H L H H H H H H L

TC74VHC244F (XT800A00) Octal 3-State Bus Buffer
AD2: IC301

74VHC245SJX (XY874A00) Octal 3-State Bus Buffer
AD2: IC304, 305

HD74LV273AFPEL (IS027300) Octal 3-State D-Type Flip Flop
AD: IC302

1G

1 2

20 19

VDD (Vcc) 2G

D1R A1 A2 A3 A4 A5 A6 A7 A8 GND

1 2 3 4 5 6 7 8 9 10

20 19 18 17 16 15 14 13 12 11

VCC OE B1 B2 B3 B4 B5 B6 B7 B8

CLR 1Q 1D 2D 2Q 3Q 3D 4D 4Q GND

1 2 3 4 5 6 7 8 9 10

20 19 18 17 16 15 14 13 12 11

Vcc 8Q 8D 7D 7Q 6Q 6D 5D 5Q CLK

1A1 2Y4 1A2

Q

3 4 5

18 17 16

1Y1 2A4 1Y2

CL D CK

Q CL CK D

D CK CL Q

2Y3 1A3 2Y2 1A4 2Y1

CK D CL Q

6 7 8 9

15 14 13 12 11

2A3 1Y3 2A2 1Y4 2A1

Q

CL D CK

Q CL CK D

D CK CL Q

CK D CL Q

(GND) Vss 10

8

LMY4-AD

s CIRCUIT BOARD
AD2 Circuit Board
A

A' A

A'

Component side

AD2: V509980
9

LMY4-AD

AD2 Circuit Board
A

A' A

A'

Pattern side

AD2: V509980 10

LMY4-AD

s TEST PROGRAM
1. Scope of Application This specification shall apply to LMY4-AD. 2 .Preparations 2-1. Conditions Set LMY4-AD (product) on AI8 and carry out test. Unless otherwise indicated, the following conditions shall apply. 0 dBu=0. 775 Vrms Output impedance shall be 150 ohm. Input impedance of the oscilloscope, level gauge, etc. shall be 100 ohm or more. Noise measurement shall be corrected with LPF at 12.7 kHz, -6 dB/OCT. (To be measured not by effective value but by mean value) Unless otherwise indicated, WORD CLOCK of AI shall be INT48 k. For testing of Fs operation range, supply shall be made via BNC from Function generator. WORD CLOCK of AO8 shall be supplied via INPUT A port. AO8 analog output load shall be 600 ohm.

2-2. Test program Test program is activated by setting DIP SW of AI8/ AO8 in debug mode and then turning power ON. For setting procedure, refer to Section 4.

Connection diagram
Applicable card AI8 AO8 LMY4-DA

68-pin cable OUTPUT A INPUT A

SIN oscillator

Select Clock source by test.

Strain mater

Int48 k BNC

Function generator

11

LMY4-AD

3. Test 3-1.OPTION CARD ID After inserting the card, carry out ID checking when power is ON. Display on 7-segment LED in front of AI8: left place = (slot No.) and right place = (card type). Display is made of 8 slots each in order. Thus, visually ensure that they are recognized as LMY4-AD. Finally, currently locked WordClock source is displayed. Check visually as required. Turn power ON in debug mode. * Display of 7-segment LED according to card type Recognized as LMY4-ML Display 8 slots each per second. Recognized as LMY4-AD Recognized as LMY4-DA Others 1L (1L) to 1A (1A) to 1d (1D) to 1 (1 ) to 0L (8L) 8A (8A) 8d (8D) 8 (8 )

Display currently locked clock source (real time).

* Display of 7-segment LED according to clock source (Ref. 4.) Int 48 kHz from Port A PA (PA) 48 (48) Int 44.1 kHz from Port B Pb (Pb) 44 (44) Int 39 kHz from Port C 39 (39) PC (PC) from BNC -- (--) UNLOCK UA (UL blinking)

3-2. Gain, frequency characteristic, distortion rate (ch1 and 2 each) Input terminal AI8 (LMY4-AD) Output terminal AO8 (LMY4-DA) (Set at +24dB) Input level +23 dBu -7 dBu Onput level 20 Hz
(*1)

1 kHz

20 kHz
(*1)

THD 1 kHz 0.007% or less 0.005% or less

+23 +/- 1.0 dB -2.0 to+1.0 dB -2.0 to+1.0 dB
(*2) (*2) (*2)

-30 +/- 0.4 dB

-30 +/- 0.4 dB -30 +/- 0.4 dB

(*1): Set reference at 1 kHz input. (*2): Set reference at +23 dBu input.

3-3. Difference in level between ch's Gain difference measured in 3-2. shall be specified as follows. Tolerance 1 dB or less

12

LMY4-AD

3-4. Residual noise (LPF: 12.7 kHz) Input terminal Output terminal AI8 (LMY4-AD) AO8 (LMY4-DA) (Set at +24 dB) Input 150 ohm shorted -96 dB or more Condition Residual noise

3-5. Crosstalk (1 kHz) Input terminal Output terminal AI8 (LMY4-AD) AO8 (LMY4-DA) (Set at +24 dB) Input 150 ohm shorted CH (N) to CH (N-1) or CH (N+1) 90 dB or more Condition Crosstalk

3-6. Signal LED lightening level

Input terminal Output terminal AI8 (LMY4-AD) AO8 (LMY4-DA)

Input level

(GAIN=0 dB) (Set at +24 dB)

Light up at -10 +/-2 dBu or more

3-7. Fs operation range (ch1 and ch4 each) Supply CLOCK from BNC of AI8. (48 kHz+6.5%, 44.1 kHz-10%) Set UNC card so as to change CLOCK of AI8 over to BNC. q Fs=51.12 kHz (48 kHz+6.5%) Set Function Generator at 51.12 kHz. Output level as listed below shall be obtained. Input terminal Input frequency AI8 (LMY4-AD) 1 kHz +23 dBu input level Output terminal AO8 (LMY4-DA) (Set at +24 dB) +23 +/- 1.0 dBu Tolerance

q Fs=39.69 kHz (44.1 kHz-10%) Set Function generator at 39.69 kHz. When tested in the same way as in q, the same output level shall be achieved. * All CHs shall be tested for 3-2. to 3-7.

13

LMY4-AD

4. Setting DIP SW for AI8/ AO8 UNC circuit board configuration is the same for both AI8 and AO8, though each DIP SW has a different meaning. The following shows the setting, though DipSW 8 is not used in any case (invalid). UNC circuit board 1: ON 1 0: OFF 2 3 4 5 6 7 8 CUP

* Setting AI8 (UNC) DIP SW [1: ON (=GND) 0: OFF (= +5 V)] 1 Operation mode (*1) WC Sel mode (*1) GAIN mode A/B Sel (*2) Phantom (*2) GAIN (*2) 1: Operation 1, 1, 1 Int 48 kHz 1, 1, 1 sweep 1: ALL A 1: ALL OFF 1: ALL MIN (0 dB) 0, 1, 1 Int 44.1 kHz 1, 0, 1 Int 39 kHz 0: Debug 1, 1, 0 0, 1, 0 0, 0, 1 WC WC WC (OUTPUT A) (OUTPUT B) (OUTPUT C)

In order of 2, 3, 4

1, 0, 0 0, 0, 0 BNC Not used

0, 1, 1 78 dB

1, 0, 1 66 dB

0, 0, 1 54 dB

1, 1, 0 48 dB 0: ALL B

0, 1, 0 42 dB

1, 0, 0 18 dB

0, 0, 0 12 dB

5 6 7

0: ALL ON 0: 2, 3, 4 GAIN mode (*1)

(*1) When DipSW7 is OFF, "WC Sel = Int48kHz fixed and DipSW 2,3,4 in GAIN mode." (*2) Gray area is effective only for LMY2-ML. Thus, DipSW 5, 6, and 7 shall be turned ON for test.

* Setting AO8 (UNC) DIP SW [1: ON (=GND) 0: OFF (= +5V)] ON INPUT A provides CLOCK Set GAIN= +24 dB 1 2 3 4 5 6 7 8

For details of AO8 DipSW, refer to SPECIFICATION FOR OVERALL TEST ON LMY4-DA.

14

AD CARD

LMY4-AD PARTS LIST
s CONTENT OVERALL ASSEMBLY .............................................................. 2 ELECTRICAL PARTS ............................................................... 3

Notes: DESTINATION ABBREVIATIONS
A: B: C: E: H: I: Australian model British model Canadian model European model North European model Indonesian model J: U: V: W: X: Y: Japanese model U.S. model General export model (110V) General export model (220V) General export model Export model

·The numbers in "QTY" shows quantities for each unit. ·The parts with "--" in "Parts No." are not available as spare parts. ·The mark " } " in the remarks column indicates that these parts are interchangeable.

LMY4-AD

s OVERALL ASSEMBLY

10

50

20 30

60 40

10

REF NO. PART NO. DESCRIPTION -V4103000 VV441000 EP600190 V4238900 V5099800 VS863000 OVERALL ASSEMBLY Overall Assembly Panel Knob Bind Head Tapping Screw-B Lans Circuit Board Bonding Head Screw

REMARKS LMY4-AD (V451620) ABS 3.0X8 MFZN2BL AD2 3.0X6 MFZN2BL (XW291A0)

QTY RANK

10 20 30 40 50 60

2 2 2 8

01 01

01

: New parts

RANK: Japan only

2

LMY4-AD

s ELECTRICAL PARTS
REF NO. PART NO. DESCRIPTION V5099800 V5620900 V5620900 UR847220 UR837220 UR857100 UR857100 UR837220 UR837100 V5620900 V5620900 UR847220 UR837220 UR857100 UR857100 UR837220 UR837100 V5829200 V5829200 V5829300 UR838100 UB044100 V5620900 V5620900 UB044100 UB052100 UB044100 UB052150 UB044100 UB052150 UB044100 UB044100 UR847220 UR837220 UB051820 UB245100 UB245100 VE788700 VE788700 UR857100 UR857100 UA354100 UR837220 UR837100 V5620900 V5620900 UR847220 UR837220 UR857100 UR857100 UR837220 UR837100 UR847100 UR847100 UR847100 UR847100 UR847100 UR847100 UR847100 UR847100 V T6 4 0 3 0 0 V3840700 V3840700 V3840700 V3840700 V3840700 V3840700 V3840700 V3840700 V T3 3 2 9 0 0 V T3 3 2 9 0 0 V T3 3 2 9 0 0 V T3 3 2 9 0 0 FZ006920 ELECTRICAL PARTS Circuit Board Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Capacitor Capacitor Capacitor Capacitor Monolithic Ceramic Cap. Electrolytic Cap. Electrolytic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Electrolytic Cap. Electrolytic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Electrolytic Cap. Electrolytic Cap. Mylar Capacitor Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Receptacle Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode LC Filter AD2 10.00 50.0V 10.00 50.0V 22.00 25.0V 22.00 16.0V 10.00 35.0V 10.00 35.0V 22.00 16.0V 10.00 16.0V 10.00 50.0V 10.00 50.0V 22.00 25.0V 22.00 16.0V 10.00 35.0V 10.00 35.0V 22.00 16.0V 10.00 16.0V 100 20V 20SG100M+T 100 20V 20SG100M+T 100 16V 16SG100M+T 100 16V 16SG100M+T F 0.010 50V Z 10.00 50.0V 10.00 50.0V F 0.010 50V Z SL 100P 50V J F 0.010 50V Z SL 150P 50V J F 0.010 50V Z SL 150P 50V J F 0.010 50V Z F 0.010 50V Z 22.00 25.0V 22.00 16.0V SL 82P 50V J F 0.100 25V Z F 0.100 25V Z 10P 50V 10P 50V 10.00 35.0V 10.00 35.0V 0.0100 50V J 22.00 16.0V 10.00 16.0V 10.00 50.0V 10.00 50.0V 22.00 25.0V 22.00 16.0V 10.00 35.0V 10.00 35.0V 22.00 16.0V 10.00 16.0V 10.00 25.0V 10.00 25.0V 10.00 25.0V 10.00 25.0V 10.00 25.0V 10.00 25.0V 10.00 25.0V 10.00 25.0V PHEC 100P SE RN731V RN731V RN731V RN731V RN731V RN731V RN731V RN731V 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 LS MT B271KB REMARKS LMY4-AD (XW291A!) 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 04 QTY RANK

C101 C102 C111 C114 C122 C123 C131 C133 C200 C201 C209 C212 C220 C221 C229 C231 C303 C304 C305 C306 C400 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C414 C416 C417 -419 C420 C421 C422 C423 C424 C431 C433 C500 C501 C509 C512 C520 C521 C529 C531 C702 C705 C752 C755 C802 C805 C852 C855 CN300 D100 D101 D200 D201 D400 D401 D500 D501 D700 D750 D800 D850 EM100

01 01 01 01 01 RANK: Japan only

: New parts

3

LMY4-AD

REF NO. PART NO. DESCRIPTION EM101 EM102 EM200 EM201 EM202 EM300 EM301 EM302 EM303 EM400 EM401 EM402 EM500 EM501 EM502 IC100 -102 IC103 IC201 IC202 IC203 IC300 IC301 IC302 IC303 IC304 IC305 IC306 IC400 -402 IC403 IC501 IC502 IC503 IC600 IC700 IC750 IC800 IC850 JK100 JK200 JK400 JK500 L300 -303 LD100 LD101 LD200 LD201 LD400 LD401 LD500 LD501 LD700 LD750 LD800 LD850 R100 R101 R102 R103 R104 R105 R106 R107 R109 R110 R111 R112 R113 R114 R115 R116 R117 R118 FZ006920 FZ006970 FZ006920 FZ006920 FZ006970 FZ006920 FZ006920 FZ006970 FZ006970 FZ006920 FZ006920 FZ006970 FZ006920 FZ006920 FZ006970 XJ553A00 XJ553A00 XV065A00 XJ553A00 XJ553A00 XV065A00 XM167A00 XT800A00 IS027300 IS013810 XY874A00 XY874A00 IS000800 XJ553A00 XJ553A00 XV065A00 XJ553A00 XJ553A00 XV065A00 XM167A00 XJ553A00 XJ553A00 XJ553A00 XJ553A00 VL958600 VL958600 VL958600 VL958600 V2589800 V2589800 V2451800 V2451800 V2451800 V2451800 V2451800 V2451800 V2451800 V2451800 V5074100 V5074100 V5074100 V5074100 HF758100 HF758100 VC328800 VC328800 VC328300 VC328300 V5099500 VC322700 VC330000 VC328300 VC330100 VC327400 VC323500 VC328800 VC327800 VC329000 VC329400 VC328800 LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter LC Filter IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC XLM Connector XLM Connector XLM Connector XLM Connector Chip Inductance Chip Inductance LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) LED (Chip) Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor LS MT B271KB LS MT Y223NB LS MT B271KB LS MT B271KB LS MT Y223NB LS MT B271KB LS MT B271KB LS MT Y223NB LS MT Y223NB LS MT B271KB LS MT B271KB LS MT Y223NB LS MT B271KB LS MT B271KB LS MT Y223NB NJM2068MD-T1 NJM2068MD-T1 AK5392-VS-E2 NJM2068MD-T1 NJM2068MD-T1 AK5392-VS-E2 YAC509 TC74VHC244F HD74LV273AFPEL SN74LV138ANSR 74VHC245SJX 74VHC245SJX HD74LV08AFPEL NJM2068MD-T1 NJM2068MD-T1 AK5392-VS-E2 NJM2068MD-T1 NJM2068MD-T1 AK5392-VS-E2 YAC509 NJM2068MD-T1 NJM2068MD-T1 NJM2068MD-T1 NJM2068MD-T1 XLM-3-31PCV XLM-3-31PCV XLM-3-31PCV XLM-3-31PCV BK2125LM751 2 BK2125LM751 2 SML-010LT SML-010LT SML-010LT SML-010LT SML-010LT SML-010LT SML-010LT SML-010LT PG1101F-TR PG1101F-TR PG1101F-TR PG1101F-TR 100.0K 1/4 J 100.0K 1/4 J 10.0K 1/4 F 10.0K 1/4 F 6.2K 1/4 F 6.2K 1/4 F 120K 1/4 F 39.00 1/4 F 33.0K 1/4 F 6.2K 1/4 F 36.0K 1/4 F 2.7K 1/4 F 68.00 1/4 F 10.0K 1/4 F 3.9K 1/4 F 12.0K 1/4 F 18.0K 1/4 F 10.0K 1/4 F

REMARKS

QTY RANK 01 02 01 01 02 01 01 02 02 01 01 02 01 01 02 02 02 12 02 02 12 11

OP AMP OP AMP A/D CONVERTER OP AMP OP AMP A/D CONVERTER ADFC BUFFER D-FF DECODER BUFFER BUFFER AND OP AMP OP AMP A/D CONVERTER OP AMP OP AMP A/D CONVERTER ADFC OP AMP OP AMP OP AMP OP AMP CH1, SIGNAL CH2, SIGNAL CH3, SIGNAL CH4, SIGNAL

02 02 12 02 02 12 11 02 02 02 02 08 08 08 08

01 01 01 01

01

01 01

01 01 RANK: Japan only

: New parts

4

LMY4-AD

REF NO. PART NO. DESCRIPTION R119 R120 R121 R122 R123 R124 R125 -128 R200 R201 R202 R203 R204 R205 R206 R207 R209 R210 R211 R212 R213 R214 R215 R216 R217 R218 R219 R220 R221 R222 R223 R224 R225 -228 R400 R401 R402 R403 R404 R405 R406 R407 R409 R410 R411 R412 R413 R414 R415 R416 R417 R418 R419 R420 R421 R422 R423 R424 R425 -428 R500 R501 R502 R503 R504 R505 R506 R507 R509 R510 R511 R512 R513 R514 R515 VC321700 VC328800 VC328900 VC328800 VC328800 VC327400 HF754470 HF754470 HF758100 HF758100 VC328800 VC328800 VC328300 VC328300 V5099500 VC322700 VC330000 VC328300 VC330100 VC327400 VC323500 VC328800 VC327800 VC329000 VC329400 VC328800 VC321700 VC328800 VC328900 VC328800 VC328800 VC327400 HF754470 HF754470 HF758100 HF758100 VC328800 VC328800 VC328300 VC328300 V5099500 VC322700 VC330000 VC328300 VC330100 VC327400 VC323500 VC328800 VC327800 VC329000 VC329400 VC328800 VC321700 VC328800 VC328900 VC328800 VC328800 VC327400 HF754470 HF754470 HF758100 HF758100 VC328800 VC328800 VC328300 VC328300 V5099500 VC322700 VC330000 VC328300 VC330100 VC327400 VC323500 VC328800 VC327800 Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor 15.00 1/4 F 10.0K 1/4 F 11.0K 1/4 F 10.0K 1/4 F 10.0K 1/4 F 2.7K 1/4 F 47.0 1/4 J 47.0 1/4 J 100.0K 1/4 J 100.0K 1/4 J 10.0K 1/4 F 10.0K 1/4 F 6.2K 1/4 F 6.2K 1/4 F 120K 1/4 F 39.00 1/4 F 33.0K 1/4 F 6.2K 1/4 F 36.0K 1/4 F 2.7K 1/4 F 68.00 1/4 F 10.0K 1/4 F 3.9K 1/4 F 12.0K 1/4 F 18.0K 1/4 F 10.0K 1/4 F 15.00 1/4 F 10.0K 1/4 F 11.0K 1/4 F 10.0K 1/4 F 10.0K 1/4 F 2.7K 1/4 F 47.0 1/4 J 47.0 1/4 J 100.0K 1/4 J 100.0K 1/4 J 10.0K 1/4 F 10.0K 1/4 F 6.2K 1/4 F 6.2K 1/4 F 120K 1/4 F 39.00 1/4 F 33.0K 1/4 F 6.2K 1/4 F 36.0K 1/4 F 2.7K 1/4 F 68.00 1/4 F 10.0K 1/4 F 3.9K 1/4 F 12.0K 1/4 F 18.0K 1/4 F 10.0K 1/4 F 15.00 1/4 F 10.0K 1/4 F 11.0K 1/4 F 10.0K 1/4 F 10.0K 1/4 F 2.7K 1/4 F 47.0 1/4 J 47.0 1/4 J 100.0K 1/4 J 100.0K 1/4 J 10.0K 1/4 F 10.0K 1/4 F 6.2K 1/4 F 6.2K 1/4 F 120K 1/4 F 39.00 1/4 F 33.0K 1/4 F 6.2K 1/4 F 36.0K 1/4 F 2.7K 1/4 F 68.00 1/4 F 10.0K 1/4 F 3.9K 1/4 F

REMARKS

QTY RANK 01 01 01 01 01 01 01 01 01 01 01

01

01 01

01 01 01 01 01 01 01 01 01 01 01 01 01

01

01 01

01 01 01 01 01 01 01 01 01 01 01 01 01

01

01 01 RANK: Japan only

: New parts

5

LMY4-AD

REF NO. PART NO. DESCRIPTION R516 R517 R518 R519 R520 R521 R522 R523 R524 R525 -528 R700 R750 R800 R850 TH300 TH301 TH302 TH303 TR700 TR701 TR750 TR751 TR800 TR801 TR850 TR851 VC329000 VC329400 VC328800 VC321700 VC328800 VC328900 VC328800 VC328800 VC327400 HF754470 HF754470 VK582200 VK582200 VK582200 VK582200 VV111400 VV111400 VV111700 VV111400 VV556400 VV556500 VV556400 VV556500 VV556400 VV556500 VV556400 VV556500 UA354100 UB044100 UB050300 UB051100 UB051820 UB052100 UB052150 UB245100 UB245220 RD250000 RD254100 RD255390 RD256220 RD257100 RD257470 Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor (chip) Carbon Resistor (chip) Carbon Resistor (chip) Carbon Resistor (chip) Poly Switch Poly Switch Poly Switch Poly Switch Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Mylar Capacitor Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Carbon Resistor (chip) Carbon Resistor (chip) Carbon Resistor (chip) Carbon Resistor (chip) Carbon Resistor (chip) Carbon Resistor (chip) 12.0K 1/4 F 18.0K 1/4 F 10.0K 1/4 F 15.00 1/4 F 10.0K 1/4 F 11.0K 1/4 F 10.0K 1/4 F 10.0K 1/4 F 2.7K 1/4 F 47.0 1/4 J 47.0 1/4 J 330.0K 1/10 D 330.0K 1/10 D 330.0K 1/10 D 330.0K 1/10 D SMD075-2 SMD SMD075-2 SMD SMD125-2 SMD SMD075-2 SMD 2SC2412K Q,R,S 2SA1037K Q,R,S 2SC2412K Q,R,S 2SA1037K Q,R,S 2SC2412K Q,R,S 2SA1037K Q,R,S 2SC2412K Q,R,S 2SA1037K Q,R,S 0.0100 50V J F 0.010 50V Z SL 3P 50V C SL 10P 50V D SL 82P 50V J SL 100P 50V J SL 150P 50V J F 0.100 25V Z F 0.220 25V Z 0.0 0.0 J 10.0 0.1 J 390.0 0.1 J 2.2K 0.1 J 10.0K 0.1 J 47.0K 0.1 J

REMARKS

QTY RANK 01 01 01 01 01 01 01 01 01 01 01 01 01

}

for current linitation 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01

: New parts

RANK: Japan only

6