Text preview for : Teac-RWH500 cd rewrit.pdf part of Teac RWH500 cd recorder
Back to : Teac-RWH500 cd rewrit.pdf | Home
SERVICE MANUAL
RW-H500
CD Rewritable Deck
CONTENTS
1 SPECIFICATIONS 2
2 ADJUSTMENTS AND CHECKS 3
3 EXPLODED VIEWS AND PARTS LIST 5
4 PC BOARDS AND PARTS LIST 7
5 INCLUDED ACCESSORIES 13
NOTES
PC boards shown are viewed from parts side.
Parts marked with * require longer delivery time.
The parts with no reference number or no parts number in the
exploded views are not supplied.
As regards the resistors and capacitors, refer to the circuit diagrams
contained in this manual.
£ Parts marked with this sign are safety critical components. They
must be replaced with identical components - refer to the appropriate £
parts list and ensure exact replacement.
Parts of [ ] mark can be used only with the version designated.
Effective : May, 2000 S-0021A
1 SPECIFICATIONS
Media type ............CD-RW and CD-R for Digital audio (record and
playback), CD (playback only)
Frequency converter input sampling frequency ........32kHz~48kHz
Recording sampling frequency ..........................................44.1kHz
Frequency response ....................................................20Hz~20kHz
(playback: ±0.5dB, recording: ±1dB)
Signal to noise ratio ............................More than 93dB (playback)
More than 87dB (recording)
Dynamic range ....................................More than 93dB (playback)
More than 87dB (recording)
Total Harmonic Distortion ................Less than 0.007% (playback)
Less than 0.009% (recording)
Wow & flutter ..........................................................Unmeasurable
Audio Input Sensitivity/Impedance ........LINE: -6dBV (0.5V) /20k
Maximum Input level ......................................LINE: +6dBV (2.0V)
Output Level/Impedance ..........................LINE: -6dBV(0.5V) /1k
Maximum Output level ....................................LINE: +6dBV (2.0V)
Power supply........120/230 V AC, 50/60Hz (General export model)
230 V AC, 50Hz (Europe model)
Power consumption ..............................................................25 W
Dimensions (W x H x D) ................................285 x 129 x 310 mm
(11-1/4"x5-1/16"x12-3/16")
Weight (Net) ........................................................5.7kg (12-1/2 lb)
Standard Accessories..................Audio signal connection cord x 2
Remote control cord x 1
Remote control unit x 1
Batteries (AA,R6,SUM-3) x 2
Improvements may result in specification or feature changes
without notice.
SAFETY INFORMATION
This product has been designed and manufactured according to FDA regulations "title 21, 1 For U.S.A.
CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of
1968", and is classified as a class 1 laser product. There is no hazardous invisible laser
radiation during operation because invisible laser radiation emitted inside of this product
is completely confined in the protective housings.
The label required in this regulation is shown 1.
OCAUTION
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Optical pickup: Type : KRS-202A or KRS-220B
Manufacturer : SONY Corporation
Laser output : Less than 0.1 mW (Play) and 32 mW (Record)
on the objective lens
Wavelength : 777 - 787 nm
2
2 ADJUSTMENTS AND CHECKS
2-1 Test Mode
In Standby mode, press and hold the stop + play + pause keys
simultaneously for 5 seconds. The display will show the model
name and the system controller's version number, and the test
mode is initiated.
Press the stop key to exit from the test mode and return to the
standby mode.
2-1-1 Front key check
1. Press the play key to enter the front key check mode.
2. The display shows the name of each key to be checked; press
the corresponding key.
When the check result of the key is OK, the display shows
another key name. When the result is No Good, the display
continues to show the same key name.
3. When all of the keys have been checked, the display shows vol50,dial50
"vol50,dial50". Check the multi jog dial to confirm that dial
the figure after " dial " increases when the dial is rotated
clockwise and decreases when it is rotated counterclockwise. vol
4. Then check the rec level control to confirm that the figure after
"vol" increases when the control is rotated clockwise and
decreases when it is rotated counterclockwise.
5. Press the play key to exit from the front key check mode and
return to the Version number display mode.
2-1-2 Display check
1. Press the display key to enter the display check mode.
2. Press display key a few times and ensure that each press lights
the display blocks one after another.
3. When all the indicators are lit, press the display key to exit
from the display check mode and return to the Version number
display mode.
2-1-3 EEPROM default setting
1. Press the erase key.
This writes the default values in the EEPROM and checks the
written data. When the default data is written correctly, the
display shows " EEPROM OK !! ". If not, it shows EEPROM OK !! EEPROM
"EEPROM NG !!". NG !!
2. Press the erase key again to return to the Version number
display mode.
2-1-4 Total recording time display
1. When the record key is pressed, the display shows the time in
which the pickup outputs the recording power (in the unit of
hour).
2. Press the record key again to return to the Version number
display mode.
3
2-2 Audio Check
2-2-1 Playback performance
Measurement point: LINE OUT
Mode: play
ITEM TEST DISC PLAYBACK SIGNAL SPECIFICATIONS REMARKS
1. Playback level MCD-111
1kHz, 0dB 2.0 0.4V
Track 2
2. Playback frequency
MCD-111 Reference level: 1kHz
response 20Hz 20kHz, 0dB 0 0.5dB
Track 3 6
3. Playback distortion MCD-111
1kHz, 0dB 0.012% or less 20kHz LPF in
Track 2
4. Playback S/N ratio MCD-111
dB 88dB or better 20kHz LPF in IEC-A
Track 7
5. Playback channel
separation MCD-111
1kHz, 0dB 80dB or better IEC-A
Track 8, 10
2-2-2 Monitor performance
Measurement point: LINE OUT
Mode: record monitor
ITEM INPUT SIGNAL (LINE IN) SPECIFICATIONS REMARKS
Turn rec level to display "VOLUME +1dB".
Do not alter the value after setting.
1. Specified input level
1kHz, 6dBv 6dBv 2dB
VOLUME +1dB
2. Monitor frequency
Reference level: 1kHz
response 20Hz 20kHz, 6dBv 0 1dB
Ratio between the output level and noise when
the input level is +6 dBv.
3. Monitor S/N ratio
83dB or better 6dBv
20kHz LPF in IEC-A
4. Monitor channel L (R) ch: 1kHz, 6dBv Ratio between the L CH and R CH outputs.
75dB or better
separation R (L) ch: No signal
Lch: 10kHz, 6dBv
55dB or better IEC-A
Rch: No signal
5. Monitor distortion
1kHz, 5dBv 0.015% or less 20kHz LPF in
4
3 EXPLODED VIEWS AND PARTS LIST
5
PARTS LIST
£
£
£
£
£
£
£
6
4 PC BOARDS AND PARTS LIST
7
8
9
10
CONVERTER PCB ASSY POWER PCB ASSY
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
FRONT PCB ASSY £
£
£
£
REG PCB ASSY
£
11
P SUB PCB ASSY
£
£
AUDIO PCB ASSY
DIGITAL I/O PCB ASSY
V SELECT PCB ASSY
£
12
5 INCLUDED ACCESSORIES
INCLUDED ACCESSORIES
13
SCHEMATIC DIAGRAM RW-H500 CONVERTER PCB (1/5) (3E9024700B)
1 2 3 4 5 6 7 8
VCC
C_DONE
C_DONE R892 1 2 47K
DATA
TO,FROM FPGA DATA
DCLK
DCLK
NCONFIG FROM ATIO DSAP-
NCONFIG DSAP-
R740 1 2 1K RESET- RESET-
NSTATUS TREN5-
DOUT-OFF
ATDMARQ
NSTATUS TREN5-
1
ATIORDY
SRCERR
TP930
DRESET
TREN5-
ATRST
AMUTE-
C742 FROM ATIO
DSAP-
1
A
FPGA
GND-PLL
TRIG
VCC VCC TP 1000p ATIORDY ATIORDY
R757
2
1 2 47K C721 ATDMARQ ATDMARQ
1
1 2
TO FPGA C717 C716
R804 1 2 33 0.1 R741
TRIG 0.1 0.1 1 2 5V-PLL
1
VCC
2
1
C722 180
1
470p
112
111
110
109
108
107
106
105
104
103
102
101
100
C714
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
2
47/25V VCC
2
1
TO ATIO ATRST R742
PE13
PE11
VSS
PE10
VSS
VSS
AVSS
PE12
PE9
PE8
PE7
PE6
VCC
PE5
PE4
DREQ1
DREQ0
AVCC
PF7
PF6
PF5
PF4
PF3
PF2
PF1
PF0
DRACK1
DRACK0
2
ATRST VCC
3K
1
1
C724 C723
2
TO DIO,AUDIO DRESET ASACK- 1 84 47/25V
DRESET DACK0 RES R744 R745 MD1:H NORMAL 0.1
ATACK- 2 83 MCK
2
2
DACK1 CK
2
2
2
3 82
VSS PLLVSS R746
4 81 U709
A0 PLLCAP 12K 12K 12K
A1 R813 1 2 22 5 80 R743 1 50
A1 PLLVCC VCC VSS
A2 R814 1 2 22 6 79 MD0 1 2 D0 2 49 D15
1
1
1
A2 MD0 12K DQ1 DQ16
A3 R815 1 2 22 7 78 MD1 D1 3 48 D14
A3 MD1 DQ2 DQ15
A4 R816 1 2 22 8 77 FWE D2 4 47 D13
A4 VCC DQ3 DQ14
A5 9 76 D3 5 46 D12
A5 U707 NMI DQ4 DQ13
A6 10 75 MD2 6 45
A6 MD2 VCC VSS
A7 11 74 3 D4 7 44 D11
A7 HD64F7044 EXTAL DQ5 DQ12
SRCERR A8 12 73 MD3 2 D5 8 43 D10
SRCERR A8 MD3 DQ6 DQ11
DOUT-OFF A9 13 72 C720 1 D6 9 42 D9
DOUT-OFF A9 XTAL DQ7 DQ10
A10 14 71 1 2 D7 10 41 D8
A10 VSS DQ8 DQ9
DIR 15 70 D0 X701 7.17MHz 11 40
PC11 D0 NC NC
2
ASEN 16 69 D1 0.1
PC12 D1 NON FRASH MCK:28.7MHz
ATEN 17 68 D2
PC13 D2 VCC
UNLOCK 18 67 D3 R747
TO,FROM DIO UNLOCK PC14 D3
19 66 D4 12K 15 36
1
PC15 D4 C719 NC NC
LAT1 20 65 16 35
B LAT1 PB0 VCC NC LCAS ASCASL- FROM FPGA
1
21 64 D5 0.1 RDWR 17 34 ASCASH-
VCC D5 WE UCAS
LAT2 22 63 D6 RAS 18 33
LAT2 PB1 D6 RAS OE
23 62 D7 19 32 A10
VSS