Text preview for : UV1316.pdf part of Philips UV1316 UV1316



Back to : UV1316.pdf | Home

www.DataSheet4U.com

Datum 981218

PRODUKTINFORMATION
HÄMTFAX 08-580 941 14 FAX ON DEMAND +46 8 580 941 14 INTERNET http://www.elfa.se

TEKNISK INFORMATION 020-75 80 20 ORDERTEL 020-75 80 00 ORDERFAX 020-75 80 10 TECHNICAL INFORMATION +46 8 580 941 15 ORDERPHONE +46 8 580 941 01 ORDERFAX +46 8 580 941 11
Vi reserverar oss mot fel samt förbehåller oss rätten till ändringar utan föregående meddelande

ELFA artikelnr. 73-104-85 UV1316/IEC TV-tuner

Antal sidor: 20

www.DataSheet4U.com

BU TUNERS

DATA SHEET

UV1316 VHF/UHF television tuner
Preliminary specification File under BU Tuners, DC03 1996 Oct 10

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
FEATURES · Member of the UV1300 family small sized UHF/VHF tuners · Systems CCIR: B/G, H, L, L', I and I'; OIRT: D/K · Digitally controlled (PLL) tuning via I2C-bus · Off-air channels, S-cable channels and Hyperband · Globally standardized mechanical dimensions and global standard pinning · Compact size · Complies to "CENELEC EN55020" and "EN55013". DESCRIPTION The UV1316 tuner belongs to the UV1300 family of tuners, which are designed to meet a wide range of applications. It is a combined VHF, UHF tuner suitable for CCIR systems B/G, H, L, L', I and I'. The low IF output impedance has been designed for direct drive of a wide variety of saw filters with sufficient suppression of triple transient. The tuners comply with the requirements of radiation, signal handling capability and immunity conforming with: · CISPR 13 (1990) incl. amendment 1 (1992) and amendment 2 (1993) · European standards CENELEC EN55013, EN55020. ORDERING INFORMATION TYPE UV1316/I UV1316AS/I UV1316/PH UV1316AS/PH DESCRIPTION IEC; symmetrical IF output IEC; asymmetrical IF output standard phono; symmetrical IF output standard phono; asymmetrical IF output MARKING

UV1316

The following items of information are printed on a sticker that is on the top cover of the tuner: · Type number · Code number · Origin letter of factory · Change code · Year and week code.

ORDER NUMBERS 3139 147 13171 3139 147 13191 3139 147 13161 3139 147 13181

1996 Oct 10

2

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
INTERMEDIATE FREQUENCIES FREQUENCY(1) (MHz) SYSTEM B/G, H Picture carrier Colour Sound 1 Sound 2 (if applicable) Note 1. The oscillator frequency is above the input signal frequency. CHANNEL COVERAGE OFF-AIR CHANNELS BAND CHANNELS Low band Mid band High band Notes 1. Enough margin is available to tune down to 45.25 MHz. 2. Enough margin is available to tune up to 863.25 MHz. E2 to C E5 to E12 E21 to E69 FREQUENCY RANGE (MHz) 48.25 to 82.25(1) 175.25 to 224.25 471.25 to 855.25(2) 38.90 34.47 33.40 33.16 SYSTEM L 38.90 34.47 32.40 - SYSTEM L' 33.40 37.83 39.90 - SYSTEM D/K 38.90 34.62 32.40 - SYSTEM I 39.50 35.07 33.50 33.00

UV1316

SIGNAL

SYSTEM I' 38.90 34.47 32.90 32.40

CABLE CHANNELS CHANNELS S01 to S10 S11 to S39 S40 to S41 FREQUENCY RANGE (MHz) 69.25 to 168.25 231.25 to 447.25 455.25 to 463.25

1996 Oct 10

3

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
BLOCK DIAGRAM

UV1316

handbook, full pagewidth

HIGH BAND

MIXER - OSCILLATOR IC IF

HIGH OSC. BAND MID BAND MID OSC. BAND

LOW OSC. BAND LOW BAND
(1)

PLL

1
CCA323

2 VT

3 AS

4 SCL

5 SDA

7 VS (+5 V)

9 VST (+33 V)

10

11

AGC

IF2/ IF1 GND

(1) Transformer only applicable for asymmetrical version, where IF2 is grounded.

Fig.1 Electrical block diagram.

1996 Oct 10

4

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
PINNING SYMBOL AGC VT AS SCL SDA n.c. VS n.c. VST IF2/GND IF1 GND PIN 1 2 3 4 5 6 7 8 9 10 11 TH1, TH2, TH3 and TH4 gain control voltage tuning voltage I2C-bus address select I2C-bus serial clock I2C-bus serial data not connected PLL supply voltage +5 V not connected tuner supply voltage +33 V UV1316: symmetrical IF output; UV1316AS: ground DESCRIPTION

UV1316

UV1316: symmetrical IF output; UV1316AS: asymmetrical IF output mounting tags (ground)

LIMITING VALUES Environmental conditions SYMBOL PARAMETER CONDITIONS MIN. -25 - 25 g 50 g 10 to 55 Hz - - - -10 - - - - - 0.35 - - TYP. MAX. °C % m/s2 m/s2 mm °C % UNIT

Non-operational conditions Tamb RH gB gS ambient temperature relative humidity bump acceleration shock acceleration vibration amplitude Operational conditions Tamb RH ambient temperature relative humidity +60 95 +85 100 245 490 -

1996 Oct 10

5

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
Limiting values under operational conditions The tuner can be guaranteed to function properly under the following conditions. SYMBOL VS VS(ripple) IS VST VST(ripple) IST VAGC VAGC IAGC VAS VSCL VSDA ISDA Note supply voltage peak-to-peak ripple voltage susceptibility; note 1 supply current supply voltage peak-to-peak ripple voltage susceptibility supply current AGC input voltage AGC input voltage range AGC input current address select input voltage serial clock input voltage serial data input voltage serial data input current 3 4 5 1 9 7 PARAMETER PIN - - 30 - - - 0.3 - - -0.3 -0.3 -1 MIN. 4.75 - - 33 - - 4.0 - - - - - - TYP. 5.00

UV1316

MAX. 5.50 28.5 130 35 10 1.7 4.5 4.0 20 5.5 5.5 5.5 5

UNIT V mV mA V mV mA V V µA V V V mA

1. Sinusoidal ripple voltage superimposed on the 5 V supply voltage in the frequency range of 20 Hz to 500 kHz. Criteria for TV interference >57 dB. ELECTRICAL DATA Conditional data Unless otherwise specified, all electrical values for Chapter "Electrical data" apply at the following conditions and the electrical performance is related to system B,G and H. A proper function is guaranteed within the specified operational conditions but a certain deterioration of performance parameters may occur at the limits of the operational conditions. SYMBOL Tamb RH VS VAGC VST tpr ZS(AE) ambient temperature relative humidity supply voltage AGC input voltage tuning voltage pre-heating time (+5 V at pin 7) aerial source impedance (unbalanced) PARAMETER VALUE 25 ±5 60 ±15 5.0 ±0.125 4.0 ±0.1 33 ±0.5 10 75 °C % V V V minute UNIT

1996 Oct 10

6

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
Aerial input characteristics SYMBOL VSWR PARAMETER reflection coefficient CONDITIONS referred to 75 impedance (worst case on or between picture and sound carrier at maximum gain) <1.75 GHz; complies to "EN55013 section 3.3" MIN. -

UV1316

MAX. 5

UNIT

VPSM Vant

surge protection voltage antenna connection disturbance voltage

5 -

- 46

kV dBµV

General characteristics SYMBOL fb low band mid band high band fb margin: for low band for mid/high band GV voltage gain: all channels gain taper (off-air channels) noise: low band mid band high band VAGC AGC input voltage range: VHF off-air channels cable channels high band i image rejection (nominal gain to 10 dB gain reduction): low and mid band mid band high band IF ZIF IF rejection (picture)
1/ 2

PARAMETER frequency range:

CONDITIONS

MIN.

TYP.

MAX.

UNIT

48.25 - 170.0 - 0 450.0 - 0 ±1 ±3 38 - - - - 40 35 30 - - 44 - 6 6 6 65 60 50

170.0 MHz 0 450.0 MHz 0 855.2 MHz 5 - - 50 8 9 9 9 - - - MHz MHz dB dB dB dB dB dB dB dB

<300 MHz >300 MHz

70 60 50 60 75 60

75 75 75 80 90 80

- - - - - -

dB dB dB dB dBµV dBµV

IF susceptibility:

channel E2 to E12 channel E21 to E69

1996 Oct 10

7

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner

UV1316

SYMBOL S off-air UHF

PARAMETER sound-chrominance moiré rejection:

CONDITIONS up to 40 dB gain reduction up to 30 dB minimum gain reduction

MIN. 56 56 60 68 80 80 84 - - - 74 80 90

TYP. 65 75 - - - - - 100 - - 81 100 - - - - - -

MAX. - - - - - - - - 85 70 - - - - - - 5 -

UNIT dB dB dBµV dBµV dBµV dBµV dBµV dBµV dBµV dBµV dB dB dB dB dB dB kHz kV

breakthrough susceptibility mx cross modulation: in-channel in-band low band (n ±2) mid band (n ±3) high band (n ±5) out of band Vosc oscillator voltage: IF pin all other pins overloading: 1 dB gain compression detuning of oscillator at +300 to -1000 kHz PLL lock-out pulling tuning system interference: crystal harmonics interference rejection at IF output divider interference rejection at IF output residual carrier FM caused by I2C-bus cross-talk VESD electrostatic discharge (ESD) on all pins oscillator characteristics: oscillator tuning resolution oscillator instability lock-in time Note VS = 5 V ±10%; Tamb = 0 to 60 °C note 1 input level 50 dBµV 10 kHz

68 54 57 - 2

- - -

- - -

±250 ±500 150

kHz kHz msec

1. All the pins of the tuner are protected against electrostatic discharge (ESD) up to 2 kV. The product is classified in category B ("MIL-STD-883C").

1996 Oct 10

8

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
AMPLITUDE RESPONSE

UV1316

CCA307

handbook, full pagewidth

0

G (dB)

-2

-4

-6 32.4 33.4 34.47 36.15 f (MHz) 38.9

The tilt of the response curve is defined as the difference from top of the curve to the corresponding carrier (e.g. picture carrier 38.9 MHz, colour carrier 34.47 MHz and sound carrier 33.4 MHz). The specification limits for tilt are valid for nominal gain for input frequencies between 48.25 MHz to 168.25 MHz, 175.25 MHz to 447.25 MHz and 455.25 MHz to 855.25 MHz.

Fig.2 Amplitude response curve (tilt).

Visibility test (input immunity and immunity from radiated fields) The tuners meet the requirements of the european norm "EN55020", when measured in an adequate television receiver.The AGC must be adjusted such that the picture carrier level (top sync.) at the tuner output does not exceed 105 dBµV at an input signal level of 74 dBµV or greater. Radiation The tuners meet the requirements of the european norm "EN55013" and "CISPR13" (1990), when measured in an adequate television receiver.

Microphony For sound signals in the audio frequency range 100 Hz to 10 kHz and sound pressure levels up to 105 dB (20 µPa), the video signal to sound interference ratio will be greater than 40 dB.

1996 Oct 10

9

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
APPLICATION INFORMATION

UV1316

A detailed description of the I2C-bus specification, with applications, is given in brochure "The I2C-bus and how to use it." This brochure may be ordered using the code number 9398 393 40011. WRITE mode BITS BYTE Address byte Program divider byte 1 Program divider byte 2 Control information byte 1 Control information byte 2 Notes 1. A = Acknowledge. 2. R/W bit = 0 for WRITE mode, R/W bit = 1 for READ mode. ADDRESS SELECTION VS = +5 V (PLL supply voltage); for all UV1316 tuner types, the AS input (pin 3) is left floating. MA1 0 0 1 1 Notes 1. This general address is always valid for all tuner types of this group. It is recommended not to use this address in applications where a further tuner becomes necessary, e.g. television sets with an option for picture-in-picture or satellite television. 2. If the AS pin is left floating, the internal bias will automatically set the address to C2. PROGRAMMABLE DIVIDER SETTINGS (BYTES 1 AND 2) Divider ratio: N = 16 × {fRF(pc) + fIF(pc)}, where (pc) is picture carrier and fRF and fIF are expressed in MHz. fosc = N/16 (MHz). N = (8192 × n13) + (4096 × n12) + (2048 × n11) + (1024 × n10) + (512 × n9) + (256 × n8) + (128 × n7) + (64 × n6) + (32 × n5) + (16 × n4) + (8 × n3) + (4 × n2) + (2 × n1) + n0 MA0 0 1 0 1 ADDRESS C0 C2 C4 C6 VOLTAGE AT PIN 3 0 to 0.1VS don't care (see notes 1 and 2) 0.4 to 0.6VS 0.9VS to VS 7 MSB 1 0 n7 1 P7 6 1 n14 n6 CP P6 5 0 n13 n5 0 P5 4 0 n12 n4 0 P4 3 0 n11 n3 1 P3 2 MA1 n10 n2 1 P2 1 MA0 n9 n1 1 P1 0 LSB R/W(2) n8 n0 0 P0 A(1) A A A A A

1996 Oct 10

10

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
CONTROL BYTE 1 CP can be set to either 0 (low current) or 1 (high current). Charge pump settings: CP = 1, for fast tuning CP = 0, for moderate speed tuning with slightly better residual oscillator FM. CONTROL BYTE 2 BAND SWITCHING Low band Mid band High band Notes 1. X = don't care; P0 to P7 are output ports on the PLL device. 2. P3 must be set 0, because at this combined input/output port, the address voltage is applied. TELEGRAM EXAMPLES (WRITE MODE) Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb1 - Ack - Cb2 - Ack - Stop. Start - Adb - Ack - Cb1 - Ack - Cb2 - Ack - Db1 - Ack - Db2 - Ack - Stop. Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb1 - Ack - Stop. Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Stop. Where: Start = start condition Adb = address byte Db1 = divider byte 1 Db2 = divider byte 2 Cb1 = control byte 1 Cb2 = control byte 2 Stop = stop condition. BIT (1) P0 X X X P1 X X X P2 X X X P3(2) 0 0 0 P4 0 1 1 P5 1 0 1 P6 0 0 0

UV1316

P7 1 1 0

Remark: for channel selection involving band switching, and to ensure smooth tuning to the desired channel without causing unnecessary charge pump action, it is recommended to consider the difference between wanted channel frequency (fw) and the current channel frequency (fc): · If fw > fc, use telegram as: Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb1 - Ack - Cb2 - Ack - Stop. · If fw < fc, use telegram as: Start - Adb - Ack - Cb1 - Ack - Cb2 - Ack - Db1 - Ack - Db2 - Ack - Stop. Unnecessary charge pump action will result in very low tuning voltage (VT 0 V) which may drive the oscillator to extreme conditions.

1996 Oct 10

11

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
READ mode The in-lock flag can be read by setting the R/W bit to 1. BITS BYTE Address byte Status byte Notes 1. A = Acknowledge. 2. R/W bit = 0 for WRITE mode, R/W bit = 1 for READ mode. 7 MSB 1 POR(3) 6 1 FL(4) 5 0 I2(5) 4 0 I1(5) 3 0 I0(5) 2 MA1 A2(6) 1 MA0 A1(6) 0 LSB

UV1316

A(1) A A

R/W(2) A0(6)

3. POR = Power On Reset. POR is internally set to 1 in case VS drops below 3 V. The POR bit is reset when an end of data is detected by the PLL IC. 4. FL = In-lock flag; FL = 1: loop is phase-locked. The loop must be phase-locked during at least 8 periods of the internal 7.8125 kHz reference frequency before the FL flag is internally set to 1. 5. I2, I1 and I0 = digital information for I/O ports P2, P1 and P0 respectively. 6. A2, A1 and A0 = not used. TELEGRAM EXAMPLES (READ MODE) Start - Adb - Ack - STB - Ack - STB - - Stop (no Ack from processor = End-of-data). Start - Adb - Ack - STB - - Stop (no Ack from processor = End-of-data). Where: STB = Status byte.

1996 Oct 10

12

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
Tuning supply voltage Pin 9 must be set to a typical tuning voltage of 33 V (maximum 35 V and minimum 30 V). Alternatively, a constant current of 1 to 1.5 mA can also be applied. Figure 3 shows an alternative supply from a 140 V source. The Zener diode prevents the tuning voltage at pin 9 from exceeding 33 V. I2C-bus load

UV1316

The UV1316 contains a series resistor (R = 100 ) in the SCL and SDA lines. Both lines also have a capacitive load of typical 56 pF (see Fig.4).

handbook, halfpage

VCC R1 R3 15 C1 56 pF

handbook, halfpage

100 100 k 11 R2 TUNER

AS

140 V

33 V R4
MCD579

C2 56 pF 14

100 R5 100 C3 56 pF

SDA

13

SCL

PLL IC

MBH031

Fig.3 Constant current supply.

Fig.4 I2C-bus load.

IF bandwidth The typical IF bandwidth is 12 MHz. IF output impedance The IF output impedance at 36.15 MHz is 73+j40.4 for symmetrical versions. For asymmetrical versions it is 73+j48.2 . IF load The minimum permissible resistive load is 1 k, the maximum capacitive load is 22 pF.

To guarantee optimal signal handling performance the reactive load of the IF circuitry (interconnections, saw filter) has to be tuned to tuner IF centre frequency. The IF output is to be maintained at 105 dBµV maximum. In case this limit is exceeded, the tuner gain should be reduced accordingly.

1996 Oct 10

13

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
Automatic gain control (AGC)

UV1316

handbook, full pagewidth

High band input 10 k 1.0 nF

Mid band input 10 k AGC 10 k Low band input 4.7 nF 360 k 4.7 nF
CCA308

4.7 nF

For optimum performance, the adjustment of the AGC take over point should be maintained at IF output level of 105 dBµV.

Fig.5 Internal AGC circuit.

TYPICAL AGC CURVES

6
handbook, halfpage

CCA309

handbook, halfpage

6

CCA310

VAGC (V) 4

VAGC (V) 4

2

2

0

10

-10

-30

-50

-70 G (dB)

-90

0

10

-10

-30

-50

-70

-90 G (dB)

Fig.6

AGC characteristics channel E2 (48.25 MHz).

Fig.7

AGC characteristics channel S10 (168.25 MHz).

1996 Oct 10

14

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner

UV1316

6
handbook, halfpage

CCA311

6
handbook, halfpage

CCA312

VAGC (V) 4

VAGC (V) 4

2

2

0 10

-10

-30

-50

-70

-90 G (dB)

0 10

-10

-30

-50

-70 -90 G (dB)

Fig.8

AGC characteristics channel E5 (175.25 MHz).

Fig.9

AGC characteristics channel S39 (447.25 MHz).

handbook, halfpage

6

CCA313

6
handbook, halfpage

CCA314

VAGC (V) 4

VAGC (V) 4

2

2

0 10

-10

-30

-50

-70 -90 G (dB)

0

10

-10

-30

-50

-70

-90 G (dB)

Fig.10 AGC characteristics channel S40 (455.25 MHz).

Fig.11 AGC characteristics channel E69 (855.25 MHz).

1996 Oct 10

15

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
MECHANICAL DATA

UV1316

Dimensions in mm. (1) Standard phono socket female 75 . (2) Alternative IEC connection.

Fig.12 Mechanical outline.

1996 Oct 10

16

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
Aerial connections Standard-phono socket female 75 or IEC (female). Solderability The solderability of pins and mounting tags when tested initially and after 16 hours steam ageing in accordance with "IEC 68-2-20", test Ta, method 1 (solder bath 235 °C for 2 s), results in a wetted area of 95%. No de-wetting will occur when soldered at 260 °C for 5 s. Resistance to soldering heat The product will not be damaged when tested in accordance with "IEC 68-2-20", test Tb, method 1A (solder bath 260 °C for 10 ±1 s). Mass Approximately 35 g. Robustness of pins

UV1316

The pins will not be damaged when tested in accordance with "IEC 68-2-21" : · Test Ua1, tensile of 10 N in axial direction · Test Ua2, thrust of 4 N in axial direction. Punching pattern of chassis PCB For optimal mounting of the tuner to a PCB the following punching pattern is recommended (see Fig.13). The tuner must be mounted without clearance between the tuner supporting surface and the printed wiring board. When mounted in this way, the tuner must be soldered to the printed circuit board (PCB). This can be achieved by pressing the unit vertically on the PCB during soldering.

handbook, 4 columns

50 ±0.05 1 +0.1 0 4 ±0.05 3 2.9 +0.1 4.9 0 7 3.9 +0.1 5.9 0
CCA318

7.5

3.75 1.1 +0.1 0 3 5

Dimensions in mm.

Fig.13 Punching pattern seen from solder side.

1996 Oct 10

17

www.DataSheet4U.com

Philips Components

Preliminary specification

VHF/UHF television tuner
DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS

UV1316

This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications.

These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.

1996 Oct 10

18

www.DataSheet4U.com

Philips Components ­ a worldwide company
Argentina: Ierod, BUENOS AIRES, Tel. (541) 786 7635, Fax. (541) 786 9367. Australia: Philips Components Pty Ltd, NORTH RYDE, Tel. (02) 805 4455, Fax. (02) 805 4466. Austria: Philips Components m.b.H., WIEN, Tel. (01) 601 01 12 12, Fax. (01) 60 101 12 10. Belgium: Philips Nederland B.V., EINDHOVEN, NL., Tel. (31) 40 2783 749, Fax. (31) 40 2788 399. Belarus: Philips Office Belarus, MINSK, Tel. (5172) 200 915, Fax. (5172) 200 773. Brazil: Philips Components, SÃO PAULO, Tel. (011) 821 2333, Fax. (011) 829 1849. Canada: Philips Electronics Ltd., SCARBOROUGH, Tel. (0416) 292 5161, Fax. (0416) 754 6248. Chile: Philips Chilena S.A., SANTIAGO, Tel. (02) 77 38 16, Fax. (02) 735 35 94. China: Philips Company, SHANGHAI, Tel. (21) 485 0600, Fax. (21) 485 1015. Colombia: Iprelenso Ltda, SANTAFE DE BOGOTA, Tel. (57) (1) 345 8713, Fax. (57) (1) 345 8712. Denmark: Philips Components A/S, COPENHAGEN S, Tel. (32) 883 333, Fax. (31) 571 949. Finland: Philips Components, ESPOO, Tel. (9) 0-615 800, Fax. (9) 0-615 80920. France: Philips Composants, SURESNES, Tel. (01) 4099 6161, Fax. (01) 4099 6427. Germany: Philips Components G.m.b.H., HAMBURG, Tel. (040) 2489 1330, Fax. (040) 2489 1426. Greece: Philips Hellenique S.A., TAVROS, Tel. (01) 4894 339/(01) 4894 911, Fax. (01) 4815 180. Hong Kong: Philips Hong Kong, KOWLOON, Tel. (852) 2784 3000, Fax. (852) 2784 3003. India: Philips India Ltd., BOMBAY, Tel. (022) 4938 541, Fax. (022) 4938 722. Indonesia: P.T. Philips Development Corp., JAKARTA, Tel. (021) 520 1122, Fax. (021) 520 5189. Ireland: Philips Electronics (Ireland) Ltd., DUBLIN, Tel. (01) 76 40 203, Fax. (01) 76 40 210. Israel: Rapac Electronics Ltd., TEL AVIV, Tel. (03) 6450 444, Fax. (03) 6491 007. Italy: Philips Components S.r.l., MILANO, Tel. (02) 6752 2531, Fax. (02) 6752 2557. Japan: Philips Japan Ltd., TOKYO, Tel. (03) 3740 5028, Fax. (03) 3740 0580. Korea (Republic of): Philips Electronics (Korea) Ltd., SEOUL, Tel. (02) 709 -1472, Fax. (02) 709 1479. Malaysia: Philips Malaysia Sdn Berhad, KUALA LUMPUR, Tel. (03) 757 5511, Fax. (03) 757 4880. Philips Malaysia Sdn Berhad, PULAU PINANG, Tel. (04) 870 055, Fax. (04) 879 215. Mexico: Philips Components, EL PASO, U.S.A., Tel. (915) 772 4020, Fax. (915) 772 4332. Netherlands: Philips Nederland B.V., EINDHOVEN, Tel. (040) 2783 749, Fax. (040) 2788 399. New Zealand: Philips New Zealand Ltd., AUCKLAND, Tel. (09) 849 4160, Fax. (09) 849 7811.
Printed in The Netherlands

Norway: Norsk A/S Philips, OSLO, Tel. (22) 74 8000, Fax. (22) 74 8341. Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI, Tel. (021) 587 4641-49, Fax. (021) 577 035/587 4546. Philippines: Philips Semiconductors Philippines Inc., MANILA, Tel. (02) 810 0161, Fax. (02) 817 3474. Poland: Philips Poland Sp. z.o.o., WARSZAWA, Tel. (22) 612 2594, Fax. (22) 612 2327. Portugal: Philips Portuguesa S.A. Wire Wound Components: OVAR, Tel. (056) 5800 331, Fax. (056) 5860 018. Other Philips Components: LINDA-A-VELHA, Tel. (01) 416 3160/416 3333, Fax. (01) 416 3174/416 3366. Russia: Philips Russia, MOSCOW, Tel. (095) 247 9124, Fax. (095) 247 9132. Singapore: Philips Singapore Pte Ltd., SINGAPORE, Tel. (65) 350 2000, Fax. (65) 355 1758. South Africa: S.A. Philips Pty Ltd., JOHANNESBURG, Tel. (011) 470 5911, Fax. (011) 470 5494. Spain: Philips Components, BARCELONA, Tel. (93) 301 63 12, Fax. (93) 301 42 43. Sweden: Philips Components AB, STOCKHOLM, Tel. (+46) 8 632 2000, Fax. (+46) 8 632 2745. Switzerland: Philips Components AG, ZÜRICH, Tel. (01) 488 22 11, Fax. (01) 481 77 30. Taiwan: Philips Taiwan Ltd., TAIPEI, Tel. (02) 388 7666, Fax. (02) 382 4382. Thailand: Philips Electronics (Thailand) Ltd., BANGKOK, Tel. (66) 2 745 4090, Fax. (66) 2 398 0793. Turkey: Türk Philips Ticaret A.S., GÜLTEPE/ISTANBUL, Tel. (0212) 279 2770, Fax. (0212) 282 6707. Ukraine: Philips Ukraine Ltd., KIEV, Tel. (044) 476 0297, Fax. (044) 476 6991. United Kingdom: Philips Components Ltd., DORKING, Tel: (01306) 512 000, Fax. (01306) 512 345. United States: Philips Components, JUPITER, Tel. (561) 745 3300, Fax. (561) 745 3600. For literature: (800) 447 3762. Display and Wire Wound Components, ANN ARBOR, Tel. (313) 996 9400, Fax. (313) 761 2776. Uruguay: Philips Components, MONTEVIDEO, Tel. (02) 704 044, Fax. (02) 920 601.
For all other countries apply to: Philips Components, Marketing Communications, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31-40-2724 547. COD07 © Philips Electronics N.V. 1996

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.