Text preview for : onkyo_tx-sr602-e_8260_sm.pdf part of ONKYO onkyo tx-sr602-e 8260 sm ONKYO Audio TX-SR602 onkyo_tx-sr602-e_8260_sm.pdf



Back to : onkyo_tx-sr602-e_8260_sm. | Home

TX-SR602/E

Ref. No. 3825
092004
SERVICE MANUAL


AV RECEIVER
MODEL TX-SR602/E/8260




TX-SR602




Black, Golden and Silver models

BMDD,BMDC,SMDC 120V AC, 60Hz
BMPP,SMPP,BMPA,SMPA,GMPT 230-240V AC, 50Hz
BMWT,GMWT 120/220-230V AC, 50/60Hz
GMGK,GMGQ,GMGR 220-230V AC, 50Hz RC-590M or
RC-591M




SAFETY-RELATED COMPONENT
WARNING!!
THE MARK FOUND ON SOME COMPONENT
PARTS INDICATES THE CRITICAL FOR RISK OF
FIRE AND ELECTRIC SHOCK.
WHEN REPLACING, BE SURE TO USE PARTS OF
IDENTICAL DESIGNATION.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.
Basic check out on receive you work on before submit PCB Auth Request.
Please give us Voltage info on each DSP ICs and where you lost audio signal ?

CONFIDENTIAL

Technical Tip
18 Park Way, Upper Saddle River, NJ 07458
Date: May 25, 2006
_____________________________________________________________

Model: HTR-330/530, TX-SR303/SR503 HTR520,TXSR502..

Subject: General troubleshooting for Protect problem.




Use scope to check at power on before unit go protection -->




Replace all driver transistors at the def.channel at the same time -->




______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
contains is strictly prohibited.
HTR520,TXSR502..
Dsp board no audio signal output
1 . Normal audio using analog inputs. Do you have all Dolby surround sound ?

2 . All DSP voltages are normal ? Did all supply voltage go to all ICs ?+5vDSP, 2.5V,+3.3V...
+7v,-7V..
3 .Input sel IC. Use CD analog input audio signal (ADRT+,ADRT- and ADLT+,ADLT-) out to DAC IC ?
Surround analog signal out (DAC L,DAC R,DAC C,DAC SW,DAC LS, DAC RS ,DAC SB* back to Input sel.IC.
Pin 1 to pin8 out to p5504. ( Same as pre out) check Mutting transistors Q5600
to Q5617 .
4 . When use digital input signal did digital light up on display ?
If missing 3.3v,2.5v 5vdsp (on Reg IC Q5640) to DSP ICs will disable DSP function. (U05 Amplifer PC board)

Please use TX-SR502 as sample Technical Tip Troubleshooting.


When you need Tech help Please use Tech Email and give us Voltage and signal info. What voltage on DSP ICs
and whereyou lost audio signal ? What you have on input IC Data line
Check with TX-SR502 Troubleshooting tips for the Microprocessor and Audio Select IC


Pop noise in speakers Check next page info you have DC in audio line at any channel .
Date: 04/13/03
ONKYO US A CORPOR ATION
200 W illiams Drive