Repair tips database, Service Manual free download,schematics,datasheets,eeprom bins,pcb,repair info for test equipment and electronics

Repair tips

Make	Model	Problem	Solution	Date

Found: 18
Bush	1433/1434/1435	Dead	Q801 chopper s/c, R809 surge lim o/c, also replace R804, 805 & IC801	14-09-04
Bush	1435GTV	Dead - fuse intact	Q801 s/c - replace with BUZ90AF, R809 0R47 & IC801	14-09-04

BUSH	1435GTV	DEAD FUSE OK	REPLACE Q801, R809 AND IC801 TRANBUZ90AF. 0.47 OHM AND IC**TDA4605	14-09-04
Goodmans	1435RS	Cogging pic	C2501 o/c	14-09-04
Goodmans	1435RS	Dead - no st/by LED	R913 220k o/c	14-09-04
Goodmans	1435RS	Excess height with top foldover	C2404 10nF sm leaky	14-09-04
Goodmans	1435RS	Field collapse	R413 6k8 o/c	14-09-04
Goodmans	1435RS	FRAME COLLAPSE	CHECK R413 6.8K FOR O/C	14-09-04
Goodmans	1435RS	Lack of height	R335 180k hi res or o/c	14-09-04
Goodmans	1435RS	Sound dist	R204 47R o/c	14-09-04
Goodmans	1435RS	Sound low or int	IF Screening can s/c screened lead from audio IF to O/P - re-position	14-09-04
Goodmans	1435RS	Sound missing	D607 1N4148	14-09-04
Goodmans	1435RS	Sound oscillates - varies with vol	Dry joint C143 - pin 14 IC101	14-09-04
Goodmans	1435RS	Volume varies	Dry joints C413 10µ 50v near speaker	14-09-04
Goodmans	1435RS	Volume won't reduce & no mute	R642 6k8 o/c	14-09-04
Goodmans	1435RS	Won't stop on chans during auto search & no col/drift when tuned in manual	No ident to IC802 pin 13 - R672 10k o/c near centre of pcb between IC201 & 301	14-09-04
Matsui	1435B	Blank raster	R981 8k2 o/c in Q967 e-b cct	14-09-04
Matsui	1435B	No sound or pic - EHT present	All user controls were set to zero perhaps due to crt flashover	14-09-04

page: 1