Make | Model | Problem | Solution | Date |
| | | |
Found: 15
|
Beon | CTV1403T | No start up | Check/replace R508/9 150k ?w, R107/8 270k ?w, D111 CNX82A opto and wire link from micro to opto coupler driver | 14-09-04 |
BPL | FMR9403 | Field jitter & lines at bottom of pic | C455 2µ2 50v (pin 2 FOP chip) | 14-09-04 |
BPL | LMR9403 | Field speed off | C232 3µ3 63v | 14-09-04 |
BPL | LMR9403 | Lines at bottom | C455 2µ2 50v (pin 2 FOP chip) | 14-09-04 |
BPL | LMR9403 | No sound | Q511 2SA1015Y & replace R520/521 120k 1/2w, C562 22µ 250v, R562 3R9 1/2w & IC7171 AN5265 | 14-09-04 |
BPL/Zenor | KLR9403 | Patt & no chan store | Earth on TXT panel o/c from main pcb - resolder | 14-09-04 |
Goodmans | 1403/2053 | MAX VOLUME IS LIMITED | IN TEST MODE TO EXIT HOLD VOLUME DOWN BUTTON WHILE TURNING ON POWER | 14-09-04 |
Goodmans | 1403R | Child lock removal | Switch on at mains switch while holding the volume down on the front controls | 14-09-04 |
Grundig | CS9403 | Dead | T60020 = BUZ90A, D600011, 12, 13, 14, 21, 23 = 1N4700, IC60030 = UC3842, R60028 = 0R68 (high) - replace it even if measures ok - known to cause HT variations on chan change or scene changes | 14-09-04 |
Matsui | 1403 | Dead | R651 o/c, STK7348 faulty & check C655 0µ47 50v for o/c | 14-09-04 |
|
Matsui | 1403 | Dead - relay clicks when sw on | R652 390k o/c in psu | 14-09-04 |
Matsui | 1403 | Int blank pic | tapping brings back pic - serv sw int - wire it out | 14-09-04 |
Matsui | 1403 | Relay clicks but stuck in StBy | R652 390k in psu | 14-09-04 |
Nokia | 4030 Core 90 | St/by only | C701 10 uf/250V. in PSU and C734 10uF/350V in secondary | 14-09-04 |
Philips | 17HT5403 | To adj sound level of this "Hotel" TV | Press Set Up then "M" then scroll down options to vol - adj vol then press "M" | 14-09-04 |