Make | Model | Problem | Solution | Date |
| | | |
Found: 7
|
Ferguson | 51K7 | NO VIDEO TEXT OK | REPLACE RV74 2.7OHMS (ICC5) | 14-09-04 |
Ferguson | ICC5 51K7 | Dead with 1.6A FP05 fuse bown | Check mains filter caps CP02 & RP01 positor | 14-09-04 |
Ferguson | ICC5 51K7 | No video - Txt OK | RV74 2R7 1/4w o/c (no 12v to RGB IC) | 14-09-04 |
Logik | LK-74 | Fault on 74cm T.V., frame collapse with slight lines above center collapse, susspect corrupted EEPROM (24C04), replaced FOP (TA8403K), picture I.C. = TB1238AN, suss data corrupt, need .hex file/set up data[list:b9d4509a8f][/list:u:b9d4509a8f] | Hi there I presume you have checked for the correct voltage on the input side of the field output ic also the sandcastle pulse,the capacitors in the field stage are always prone to drying out too due to the heat in the area. | 11-07-05 |
Salora | 24K77 | Reluctant start | Dry joints within pins 17 & 18 Ipsalo Trfmr - only visible when Tfrmr removed | 14-09-04 |
Salora | K70 | Bright red raster - Intermittent. | RH16 ( 33k ) goes o/c when hot. | 14-09-04 |
Tatung | T20TK70 | To access special features | hold in menu (i) key on set while powering up until the on-screen bargraph appears, then, press the rcu teletext index key twice. Within this menu select the feature with the prog +/- keys and alter the status of each with the vol +/- keys. The features available are......Tuning lock, Volume limit, Local control key
lock, Initial program number and Power on control. | 14-09-04 |